AI cap mockup generator

Cap mockups, generated — not templated

Small brands and print-on-demand sellers who haven't settled on one cap style search simply for a cap mockup to preview branding across a general headwear silhouette. Describe your scene and the AI builds a realistic render around your design.

Photorealistic lighting, shadows and materials
Upload your own design, logo or artwork
Any scene you can describe — no template hunting
Edit, restage, upscale and animate afterwards

Generated with Mockup Generator — “A navy blue cap photographed at a three-quarter angle on a plain white studio ba…”

Prompt ideas to start from

“A navy blue cap photographed at a three-quarter angle on a plain white studio backdrop with soft even softbox lighting, featuring a tasteful sample brand design embroidered on the front panel, no watermarks, no text overlays”Use this prompt “Cap resting on a stack of folded denim jackets”Use this prompt “Cap worn by a model walking through a sunny courtyard”Use this prompt “Overhead flat lay of a cap beside sunglasses and keys”Use this prompt

Fresh from the community

Create a realistic product mockup based on these instructions:

Design a trendy slouchie beanie mock-up featuring a cozy knit texture, displayed in various colors like deep navy, soft gray, and vibrant mustard. Showcase it on a wooden table with a rustic backdrop, including an accessory like a chunky scarf. Include a model wearing it in a casual outdoor setting.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Recreate the physical vial proportions to closely match the RetraLabs product vials in the reference catalog.

The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle.

Use these proportions:

* Tall cylindrical glass body
* Narrower/slimmer body
* Short rounded shoulder leading into a narrow neck
* Small silver crimp cap
* Cap width only slightly wider than the glass body
* Realistic pharmaceutical vial proportions
* Do NOT use an oversized cap or squat bottle shape

Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog.

For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath.

Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography.

IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.

Create a realistic product mockup based on these instructions:

Create a design showcasing a blank 9forty baseball cap from four distinct angles: front, side, back, and top. Highlight the cap's contours and stitching details, using a neutral color palette for versatility. Emphasize texture and material quality, incorporating a subtle gradient background to enhance focus on the cap itself.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Make 100ml glass vial with green flip off cap, with real cap to vial ratio so it looks like 100ml vial. Use file as label and visible part is name if the product

Make 15ml glass vial with green flip off cap, with real cap to vial ratio so it looks like 15ml vial. with white background. Use file as label and visible part is name if the product and label green background change to CMYK 10;100;0;0

Make 100ml glass vial with green flip off cap, with real cap to vial ratio so it looks like 100ml vial. with white background. Use file as label and visible part is name if the product and label green background change to CMYK 10;100;0;0

Create a realistic product mockup based on these instructions:

Create a vibrant art print mock-up set in a mid-century modern eclectic living room. Feature a bold magenta couch, paired with a brass coffee table and geometric accent pillows. The large art print, boasting a 2:3 ratio, should exude warmth with abstract patterns or a nature-inspired theme, enhancing the cozy atmosphere.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Create a realistic product mockup based on these instructions:

Create a mockup of a mid-century modern eclectic living room featuring a large, vibrant art print in A4 format prominently displayed above a sleek wooden console. Incorporate bold, geometric patterns on the rug and colorful throw pillows. The couch should be a calming teal, complemented by indoor plants and unique decorative pieces.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Create a photorealistic premium product photograph of a standard pharmaceutical research vial for RetraLabs.

The vial should match the physical proportions of the RetraLabs vials in the reference images: a medium-sized cylindrical glass vial with a moderately wide body, rounded shoulders, a short narrow neck, and a proportionate silver aluminum crimp cap.

IMPORTANT — use a NORMAL pharmaceutical vial shape. Do NOT make it tall and skinny, do NOT make it look like a test tube, and do NOT make the cap oversized.

The vial should occupy approximately 55–65% of the image height, with comfortable white space around it.

Label design:

* RetraLabs branding at the top
* Orange and white color scheme
* “GLP-3 R10” as the primary product name
* “10 mg” clearly displayed underneath
* Clean modern typography
* Minimal premium biotech/research aesthetic
* Compact label that does not cover the entire vial

Use realistic clear glass, subtle white powder visible inside the vial, realistic silver crimp cap, soft studio lighting, clean white background, natural contact shadow, and high-end pharmaceutical product photography.

The final product should look like a real RetraLabs catalog product photographed professionally, not an illustration, test tube, ampoule, or laboratory sample tube.

The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle.

Use these proportions:

* Tall cylindrical glass body
* Narrower/slimmer body
* Short rounded shoulder leading into a narrow neck
* Small silver crimp cap
* Cap width only slightly wider than the glass body
* Realistic pharmaceutical vial proportions
* Do NOT use an oversized cap or squat bottle shape

Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog.

For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath.

Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography.

IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make the e label take up the majority of the vial like in the second picture. Make the label the same size as the one in the second picture

Make 100ml glass vial with green flip off cap, with real cap to vial ratio so it looks like 100ml vial

Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field

Edited mockup: Remove all text and design from the vial. Use this file as the label to the 100m

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matte Navy flip-off top, and a rubber stopper underneath the cap. Also need cake powder at the bottom but it need to be purple powder Add my uploaded label to vial with only making the gold on the label more of a gold metallic foil look. Put on a transparent background.

100ml glass vial with green flip-off cap

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, white lyophilized powder visible inside, a gray aluminum crimp cap with a matching flip-off plastic top, and a rubber stopper underneath the cap. Apply my uploaded label exactly as provided — do not alter, regenerate, or reword any text on it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, clean warm off-white background (hex FBF8F1), minimal reflections, sharp focus on the label, shallow depth of field on the background. No other objects, no hands, no props.

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.

Photorealistic mockup of a 3ml glass peptide vial with a clean professional label and blue flip-off cap, on a white soft linen table cloth, soft studio lighting, shallow depth of field

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matching flip-off top, and a rubber stopper underneath the cap. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.

Frequently asked questions

How does the AI cap mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic cap mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the cap?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the cap with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Fitted Cap mockup generator 5-Panel Hat mockup generator Bucket Hat mockup generator Beanie mockup generator Visor mockup generator Cowboy Hat mockup generator Sun Hat mockup generator Flat Brim Cap mockup generator Curved Brim Cap mockup generator Foam Trucker Hat mockup generator All accessories mockups →