AI whiskey glass mockup generator

Whiskey Glass mockups, generated — not templated

Distilleries and gift sellers search for a whiskey glass mockup to show an engraved monogram catching light through amber liquid. It's a go-to render for premium groomsmen and executive gifts.

Photorealistic lighting, shadows and materials
Upload your own design, logo or artwork
Any scene you can describe — no template hunting
Edit, restage, upscale and animate afterwards

AI-generated whiskey glass mockup sample

Generated with Mockup Generator — “A heavy-bottomed whiskey glass with a large ice cube and amber whiskey sitting o…”

Prompt ideas to start from

“A heavy-bottomed whiskey glass with a large ice cube and amber whiskey sitting on a dark leather-topped desk beside a cigar box, featuring a tasteful sample brand design etched on the front, warm low lamp light at a close angle, no watermarks, no text overlays”Use this prompt “Whiskey glass held by a fireplace at night”Use this prompt “Whiskey glass on a wood bar top with dim lighting”Use this prompt “Whiskey glass flat lay beside a decanter”Use this prompt

Fresh from the community

Recreate the physical vial proportions to closely match the RetraLabs product vials in the reference catalog.

The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle.

Use these proportions:

* Tall cylindrical glass body
* Narrower/slimmer body
* Short rounded shoulder leading into a narrow neck
* Small silver crimp cap
* Cap width only slightly wider than the glass body
* Realistic pharmaceutical vial proportions
* Do NOT use an oversized cap or squat bottle shape

Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog.

For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath.

Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography.

IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.

Edited mockup: Make the product vial significantly larger and taller, matching the proportions

Create a photorealistic premium product photograph of a standard pharmaceutical research vial for RetraLabs.

The vial should match the physical proportions of the RetraLabs vials in the reference images: a medium-sized cylindrical glass vial with a moderately wide body, rounded shoulders, a short narrow neck, and a proportionate silver aluminum crimp cap.

IMPORTANT — use a NORMAL pharmaceutical vial shape. Do NOT make it tall and skinny, do NOT make it look like a test tube, and do NOT make the cap oversized.

The vial should occupy approximately 55–65% of the image height, with comfortable white space around it.

Label design:

* RetraLabs branding at the top
* Orange and white color scheme
* “GLP-3 R10” as the primary product name
* “10 mg” clearly displayed underneath
* Clean modern typography
* Minimal premium biotech/research aesthetic
* Compact label that does not cover the entire vial

Use realistic clear glass, subtle white powder visible inside the vial, realistic silver crimp cap, soft studio lighting, clean white background, natural contact shadow, and high-end pharmaceutical product photography.

The final product should look like a real RetraLabs catalog product photographed professionally, not an illustration, test tube, ampoule, or laboratory sample tube.

The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle.

Use these proportions:

* Tall cylindrical glass body
* Narrower/slimmer body
* Short rounded shoulder leading into a narrow neck
* Small silver crimp cap
* Cap width only slightly wider than the glass body
* Realistic pharmaceutical vial proportions
* Do NOT use an oversized cap or squat bottle shape

Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog.

For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath.

Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography.

IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matte Navy flip-off top, and a rubber stopper underneath the cap. Also need cake powder at the bottom but it need to be purple powder Add my uploaded label to vial with only making the gold on the label more of a gold metallic foil look. Put on a transparent background.

New scene: monochromatic Electric Blue background with a soft, matte gradient that transiti

Photorealistic product mockup of a shower with this tile https://www.anatolia.com/collections/teramodaa on the wall and brushed gold fixtures by pfister and glass doors

Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, white lyophilized powder visible inside, a gray aluminum crimp cap with a matching flip-off plastic top, and a rubber stopper underneath the cap. Apply my uploaded label exactly as provided — do not alter, regenerate, or reword any text on it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, clean warm off-white background (hex FBF8F1), minimal reflections, sharp focus on the label, shallow depth of field on the background. No other objects, no hands, no props.

Place on a 3ml glass vial with white cap

Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, no border, no frame, no card, no rounded corner mat, no vignette — the vial floats with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make it have a nice background. give a nice background to the vial

100ml glass vial with green flip-off cap

Frequently asked questions

How does the AI whiskey glass mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic whiskey glass mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the whiskey glass?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the whiskey glass with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Cocktail Glass mockup generator Champagne Flute mockup generator Stemless Wine Glass mockup generator Highball Glass mockup generator Rocks Glass mockup generator Martini Glass mockup generator Margarita Glass mockup generator Collins Glass mockup generator Old Fashioned Glass mockup generator Champagne Coupe mockup generator All drinkware mockups →