AI body lotion bottle mockup generator

Body Lotion Bottle mockups, generated — not templated

Body-care lines wanting a warm, spa-like feel for their lotion shots can skip renting a bathroom set. Describe the bottle and setting and AI builds the cozy scene instantly.

  • Photorealistic lighting, shadows and materials
  • Upload your own design, logo or artwork
  • Any scene you can describe — no template hunting
  • Edit, restage, upscale and animate afterwards
AI-generated body lotion bottle mockup sample

Generated with Mockup Generator — “A large body lotion bottle standing on a wooden bath tray beside a rolled towel …”

Prompt ideas to start from

“A large body lotion bottle standing on a wooden bath tray beside a rolled towel and a small candle, warm dim ambient light, featuring a tasteful sample brand design on the label, eye-level angle, no watermarks, no text overlays.”Use this prompt “Body lotion bottle beside a dish of shea butter chunks”Use this prompt “Body lotion bottle with a dollop of lotion on the cap”Use this prompt “Body lotion bottle on a windowsill with soft afternoon light”Use this prompt

Fresh from the community

Recreate the physical vial proportions to closely match the RetraLabs product vials in the reference catalog. The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle. Use these proportions: * Tall cylindrical glass body * Narrower/slimmer body * Short rounded shoulder leading into a narrow neck * Small silver crimp cap * Cap width only slightly wider than the glass body * Realistic pharmaceutical vial proportions * Do NOT use an oversized cap or squat bottle shape Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog. For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath. Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography. IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.
Use a compact amber-brown translucent plastic/glass bottle with a cylindrical body, gently rounded shoulders, a short narrow neck, and a wide white ribbed screw cap. The bottle should be small and compact, with realistic 40 ml proportions. The bottle body should be slightly larger than the 90 mm × 45 mm front label so the label fits naturally on the front without covering the cap or neck. Apply the provided 90 mm × 45 mm label cleanly and accurately to the front of the bottle, following the slight curvature of the bottle. Keep the label rectangular with sharp edges and no distortion. The bottle should have realistic amber liquid visible inside, subtle transparent-bottle reflections, natural contact shadow, professional studio lighting, and a clean commercial product-photography appearance. Do not make the bottle oversized, tall, or wide. Do not add extra text, logos, decorations, or accessories
Create a photorealistic premium product photograph of a standard pharmaceutical research vial for RetraLabs. The vial should match the physical proportions of the RetraLabs vials in the reference images: a medium-sized cylindrical glass vial with a moderately wide body, rounded shoulders, a short narrow neck, and a proportionate silver aluminum crimp cap. IMPORTANT — use a NORMAL pharmaceutical vial shape. Do NOT make it tall and skinny, do NOT make it look like a test tube, and do NOT make the cap oversized. The vial should occupy approximately 55–65% of the image height, with comfortable white space around it. Label design: * RetraLabs branding at the top * Orange and white color scheme * “GLP-3 R10” as the primary product name * “10 mg” clearly displayed underneath * Clean modern typography * Minimal premium biotech/research aesthetic * Compact label that does not cover the entire vial Use realistic clear glass, subtle white powder visible inside the vial, realistic silver crimp cap, soft studio lighting, clean white background, natural contact shadow, and high-end pharmaceutical product photography. The final product should look like a real RetraLabs catalog product photographed professionally, not an illustration, test tube, ampoule, or laboratory sample tube. The vial should be a TALL, SLIM pharmaceutical glass vial, not a short or wide bottle. Keep the glass body noticeably taller than its width. Use a relatively SMALLER silver aluminum crimp cap that is only slightly wider than the vial neck and does NOT dominate the top of the bottle. Use these proportions: * Tall cylindrical glass body * Narrower/slimmer body * Short rounded shoulder leading into a narrow neck * Small silver crimp cap * Cap width only slightly wider than the glass body * Realistic pharmaceutical vial proportions * Do NOT use an oversized cap or squat bottle shape Match the overall physical silhouette of the RetraLabs vials shown in the reference product catalog. For the label, use a smaller, cleaner label with more white glass visible above and below it. Keep the RetraLabs branding subtle and compact. Use the orange RetraLabs design with “GLP-3 R10” as the main product name and “10 mg” underneath. Keep the realistic clear glass, silver cap, white studio background, soft shadow, and clean commercial product photography. IMPORTANT: Do not redesign the physical bottle. Match the reference vial's proportions and silhouette as closely as possible. Do not make the cap oversized, do not make the bottle squat, and do not make the label cover most of the vial.
A photorealistic seasoning bottle mockup 8 fl oz
Mockup - 1:1
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matte Navy flip-off top, and a rubber stopper underneath the cap. Also need cake powder at the bottom but it need to be purple powder Add my uploaded label to vial with only making the gold on the label more of a gold metallic foil look. Put on a transparent background.
Edited mockup: Make the product vial significantly larger and taller, matching the proportions
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make the e label take up the majority of the vial like in the second picture. Make the label the same size as the one in the second picture
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, white lyophilized powder visible inside, a gray aluminum crimp cap with a matching flip-off plastic top, and a rubber stopper underneath the cap. Apply my uploaded label exactly as provided — do not alter, regenerate, or reword any text on it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, clean warm off-white background (hex FBF8F1), minimal reflections, sharp focus on the label, shallow depth of field on the background. No other objects, no hands, no props.
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it background has freeze dried skittles and chocolate
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it background has nice freeze dried skittles and chocolate
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
A premium pharmaceutical peptide bottle mockup on a dark gradient background , featuring a white pill bottle and cap. Use the reference photo as the label for the bottle. The lighting is soft and cinematic with subtle reflections and shadows, creating a high-end biotech aesthetic. Ultra-realistic, centered composition, sharp focus, professional product render. Peptide name Ultimate GI Repair 4.5mg
Create a realistic product mockup based on these instructions: Create a detailed mock-up of a stylish tote bag featuring a vibrant floral pattern on the fabric. The design should showcase both sides of the tote, highlighting sturdy, eco-friendly materials. Incorporate a soft, natural color palette and add a minimalist logo in the center for branding. Show it set against a light, inviting backdrop. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Create a realistic product mockup based on these instructions: Design a trendy slouchie beanie mock-up featuring a cozy knit texture, displayed in various colors like deep navy, soft gray, and vibrant mustard. Showcase it on a wooden table with a rustic backdrop, including an accessory like a chunky scarf. Include a model wearing it in a casual outdoor setting. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, no border, no frame, no card, no rounded corner mat, no vignette — the vial floats with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make it have a nice background. give a nice background to the vial
A premium pharmaceutical peptide bottle mockup on a dark gradient background , featuring a white pill bottle and cap. Use the reference photo as the label for the bottle. The lighting is soft and cinematic with subtle reflections and shadows, creating a high-end biotech aesthetic. Ultra-realistic, centered composition, sharp focus, professional product render. label text oriented horizontally, reading left-to-right across the front of the bottle, not rotated or vertical. Peptide name Ultimate GI Repair 4.5mg
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matching flip-off top, and a rubber stopper underneath the cap. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Create a realistic product mockup based on these instructions: Design a collection of stylish shirts that blend comfort and sophistication. Incorporate unique patterns, such as geometric shapes and floral prints, using a vibrant color palette. Include various styles, from casual button-ups to trendy oversized options, ensuring each shirt reflects a modern aesthetic while catering to diverse body types and sizes. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
A photorealistic food packaging mock up. first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Create a realistic product mockup based on these instructions: Create a vibrant art print mock-up set in a mid-century modern eclectic living room. Feature a bold magenta couch, paired with a brass coffee table and geometric accent pillows. The large art print, boasting a 2:3 ratio, should exude warmth with abstract patterns or a nature-inspired theme, enhancing the cozy atmosphere. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Create a realistic product mockup based on these instructions: Create a mockup of a mid-century modern eclectic living room featuring a large, vibrant art print in A4 format prominently displayed above a sleek wooden console. Incorporate bold, geometric patterns on the rug and colorful throw pillows. The couch should be a calming teal, complemented by indoor plants and unique decorative pieces. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it
Mockup - 1:1
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it background has freeze dried skittles
A photorealistic peptide bottle mockupd top and white backgroundlabel fits well and covers a good part of the bottle do not change the label
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make th e label take up the majority of the vial like in the second picture
redo this bottle and change nothing on the bottle except switch out the label for the new label change NOTHING ELSE
Edited mockup: make the back ground more in the navy tone, not black and use a faded gold DNA s
Edited mockup: make the background white and brighter do not change the bottle
Mockup - 1:1
Edited mockup: make the background blue smoke similar to the bottle
Create a premium, photorealistic cosmetic product mockup featuring a luxurious facial serum bottle with the provided logo prominently displayed on the front. The bottle should have an elegant, minimalist design, high-end skincare aesthetic, and realistic glass and liquid textures. Use a clean, sophisticated color palette with soft neutral tones. Place the serum bottle on a refined studio surface with subtle shadows and elegant reflections. Add a few tasteful skincare-related elements such as soft botanical leaves, water droplets, or minimal natural textures, while keeping the composition clean and uncluttered. The provided logo must be reproduced accurately, clearly visible, properly positioned, and naturally integrated into the product packaging. Do not alter, distort, redesign, or misspell the logo. Luxury skincare advertising photography, soft diffused lighting, realistic materials, premium branding, subtle depth of field, high-end beauty campaign, elegant composition, ultra-detailed, photorealistic, 4K, commercial product photography.
Edited mockup: make the background blue smoke similar to the bottle
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism.
Mockup - 1:1
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect

Frequently asked questions

How does the AI body lotion bottle mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic body lotion bottle mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the body lotion bottle?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the body lotion bottle with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Facial Mist Bottle mockup generatorToner Bottle mockup generatorCream Jar mockup generatorFace Cream Jar mockup generatorBody Butter Jar mockup generatorMoisturizer Jar mockup generatorClay Mask Jar mockup generatorFace Mask Jar mockup generatorEye Cream Jar mockup generatorNight Cream Jar mockup generatorAll packaging & labels mockups →