AI beach flag mockup generator

Beach Flag mockups, generated — not templated

Beach clubs and vendors use a beach flag mockup to preview a tall outdoor flag before ordering a set for the shoreline. It's a fast way to check visibility against sand and open sky.

  • Photorealistic lighting, shadows and materials
  • Upload your own design, logo or artwork
  • Any scene you can describe — no template hunting
  • Edit, restage, upscale and animate afterwards
AI-generated beach flag mockup sample

Generated with Mockup Generator — “A beach flag featuring a tasteful sample brand design flying beside a beach rent…”

Prompt ideas to start from

“A beach flag featuring a tasteful sample brand design flying beside a beach rental stand on a sunny shoreline, low angle against a bright blue sky and rolling waves, no watermarks, no text overlays”Use this prompt “Beach flag flying beside a lifeguard tower”Use this prompt “Close-up of flag fabric rippling over the sand”Use this prompt “Beach flag beside a boardwalk vendor stand”Use this prompt

Fresh from the community

A 20 ft ski boat distressed American flag using black blue and white,, three-quarter angle, no watermarks, no text overlays
A model wearing a golf polo shirt on a sunlit fairway with rolling green hills in the background, bright clear daylight, three-quarter angle, featuring a light blue shirt with Taino symbols in light gray a small light gray Puerto Rico flag on the left chest also gray palm trees included in the pattern.
Mockup - 1:1
Create a realistic product mockup based on these instructions: Design a vibrant, eye-catching camiseta featuring a tropical paradise scene. Incorporate bold colors like teal, coral, and sunny yellow. The front should display a stylized palm tree and sunset, while the back includes abstract wave patterns. Use a breathable fabric with a relaxed fit, perfect for summer outings and beach days. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Mockup - 1:1
Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field
Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field. Use transparent background and remove Nexgen branding
Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field
Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, shallow depth of field
Photorealistic mockup of a 10ml glass peptide vial with a clean professional label and blue flip-off cap, on a laboratory bench, soft clinical lighting, us the picture with the viles but put the label on the vials and make the color pallet match
Photorealistic product mockup of a bathroom design, professional studio lighting, clean modern scene. Shower pan: 36"W x 60"L, white base Large wall (back wall, 60" length): Othello hexagon tile, grey grout, white niche (36"W x 14"H) centered Two side walls: solid white panels/tile Bench: on the wall opposite the plumbing/valve wall Fixtures: handheld shower head, chrome finish Door: chrome-accented barn-style double slider 60" x 74", 5/16" in clear glass w jambs Height: 96" (8')
Create a photorealistic premium product packaging mockup for a new shoe freshener brand called NOVA. The product is a small, flat shoe freshener placed inside shoes. Create one stylish resealable pouch containing four individual shoe freshener pieces. The four scents are: Mint Ocean Lemon Vanilla The pouch must have the brand name NOVA prominently displayed on the front, with the text "SHOE FRESHENER" and "4 SCENTS". Make the packaging youthful, modern, premium, clean and original. Use a different visual identity for each scent while keeping NOVA's branding consistent. Show the pouch as a real physical product with realistic material, accurate shadows, realistic lighting and professional commercial product photography. The final image should look like a real product ready to be sold in stores.
Create a realistic product mockup based on these instructions: Design a flowing bohemian-inspired skirt featuring intricate floral patterns in vibrant colors. The hemline should be asymmetrical, with layers of lightweight fabric that dance with movement. Incorporate a comfortable, elastic waistband, and add subtle details like delicate lace trim or fringe accents. Perfect for carefree summer outings or beachside strolls. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Photorealistic product mockup of a archiUsing the provided Health floating-island image as the ONLY design reference, create a collection of clear close-up camera views showing the existing architecture, training area, and running track. This is NOT a redesign. Treat the original image as an already-finished 3D environment. The purpose is only to move the camera closer so a 3D artist can clearly understand what is already there. Show close views of: 1. Main Health building — clearly show the front entrance, large central arch, smaller side arches, columns, pale stone construction, wood upper section, roof, exterior walls, and stairs. 2. Main building side angle — show how the arches, side walls, roof, terrace, foundation, and surrounding landscaping connect. 3. Main staircase — clearly show the broad stone stairs, retaining walls, planters, hedges, vines, rocks, and connection between the central plaza and main building. 4. Outdoor training area — clearly show the existing pull-up bars, parallel bars, vertical training poles, benches, stone exercise pieces, paved surface, and surrounding low hedges. Preserve the same shapes, proportions, materials, colors, object placement, landscaping, and realistic visual style shown in the original image. Do not add equipment, buildings, decorations, paths, structures, architectural details, or landscaping that are not already visible. If a hidden detail cannot be determined from the original image, keep it simple instead of inventing it. Each image should feel like the camera moved closer to the exact original island. No people, text, labels, UI, redesigns, or new features.
Use Image 2 as the exact packaging shape, size, proportions, structure, and realistic mockup reference. Use Image 1 as the exact artwork/design reference. Put the complete design from Image 1 onto the packaging from Image 2, without changing anything in the design. Keep all colors, text, logos, images, badges, and graphics exactly the same as Image 1. Keep the packaging shape and proportions exactly like Image 2. Make the package perfectly straight, front-facing, flat, smooth, and wrinkle-free. No folds, creases, bending, distortion, or warped artwork. Do not add, remove, redesign, or reinterpret anything. Use a clean white background with a subtle soft shadow, like Image 2. Make it look like a premium, realistic product photograph. Image 2 = packaging shape. Image 1 = artwork. Nothing else changes.
Mockup - 1:1
Mockup - 1:1
Create a realistic product mockup based on these instructions: Design an exquisite pair of pump peep toe flats featuring a striking gold platform heel. Adorn the shoe with sparkling gems cascading elegantly down the center. Surround the heel with luxurious, soft fur that adds texture and sophistication. Opt for a bold color palette to enhance the overall glamour and style. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Place the provided company logo onto the wooden vertical slat cladding wall in the image. The signage should be centered horizontally within the wooden slats, positioned above the meeting table area and aligned with the eye level of a standing person. Convert the logo into a 3D acrylic or metal signage with clean cut edges. Add a soft backlit LED glow (halo lighting) behind the letters and icon, creating a subtle floating effect against the wood surface. The glow should be warm white to match the existing pendant lights in the scene. Ensure realistic integration by matching the perspective, depth, and scale of the image. The signage should cast soft shadows and light spill onto the wood slats. Maintain the natural lighting conditions of the room, with warm ambient tones. Follow the spacing gaps between the vertical wooden slats so that the logo appears mounted slightly forward (with spacers/standoffs) rather than flat. Preserve the original logo colors and proportions. Enhance realism with slight reflections, subtle texture, and accurate lighting interaction. Style: photorealistic, interior branding mockup, high resolution, professional corporate office environment.
Create a photorealistic studio mockup of a cylindrical 155 ml metal can using the uploaded label artwork as the exact label texture. Wrap the supplied label completely around the can, edge to edge, with the label height exactly matching the printable height of the can between the top and bottom metal rims. Do not redesign, recreate, simplify, crop, stretch, compress, distort, recolor, sharpen, blur, or modify the label artwork in any way. Preserve every logo, text block, illustration, icon, barcode, color, spacing, proportion, and graphic exactly as provided. Apply only the natural cylindrical curvature required to physically wrap the flat artwork around the can. Keep the central front artwork clearly visible and proportionally correct. Do not artificially squeeze the left or right sections toward the front. Keep the can: perfectly upright front-facing centered realistic cylindrical proportions clean metallic top and bottom rims smooth label application with no wrinkles, folds, bubbles, seams, or peeling Use a pure white seamless studio background with soft, even commercial product lighting and a subtle realistic contact shadow underneath. The final result should look like a professional packaging catalogue photograph, sharp and high resolution. Important: treat the uploaded artwork as a finished print file, not as inspiration. Do not generate or replace any text or artwork.
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism.
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Mockup - 1:1
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body, a gray aluminum crimp cap with matching flip-off top, and a rubber stopper underneath the cap. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make the e label take up the majority of the vial like in the second picture. Make the label the same size as the one in the second picture
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a silver aluminum crimp cap band, topped with an amber-orange (hex D6810C) flip-off plastic disc cap. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Only a small amount of loose white lyophilized powder dusting the bottom of the vial — the vial should look mostly empty, not filled or packed. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props. Make th e label take up the majority of the vial like in the second picture
Photorealistic studio product photo of a small 3mL glass pharmaceutical vial with a clear glass body. The neck has a plain gray aluminum crimp cap with a matching gray flip-off top — uniform gray/silver, no colored accent. A rubber stopper sits fully seated and hidden beneath the crimp cap — no rubber visible sticking out above or around the metal. Inside the vial, a solid white freeze-dried lyophilized cake sits at the bottom — a dry, compact, slightly porous solid plug of powder, not loose scattered granules, filling roughly the bottom quarter of the vial. The label wraps the vial and extends down close to the base, leaving only a small strip of bare glass visible at the neck/shoulder above the label — similar to standard commercial peptide vial labeling. Use my uploaded label image exactly as provided, pixel-for-pixel — do not regenerate, redesign, or reword any part of it. Vial centered, shot straight-on, soft even studio lighting, subtle soft shadow beneath, plain flat warm off-white background (hex FBF8F1), no border, no frame, no card, no rounded corner mat, no vignette — the vial floats on a plain background with no outline around the photo. Minimal reflections, sharp focus on the label. No other objects, no hands, no props.
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a premium, photorealistic, high-resolution studio product image using the uploaded reference images. IMAGE REFERENCE PRIORITY IMAGE 1 — PRIMARY REFERENCE: BAG DESIGN + COLORS Image 1 is the absolute reference for the first bag itself. Keep the first bag exactly the same as Image 1, including: Exact colors, shades, tones, and gradients All artwork and graphic elements Logo and branding Typography and written information Patterns and illustrations Packaging shape and proportions Dimensions and structure Seals, edges, cut-outs, and hanging hole Placement, spacing, and margins Overall visual identity DO NOT CHANGE THE COLORS OF IMAGE 1 IN ANY WAY. The extremely light/pale colors must remain exactly as they appear in Image 1. Do not make them whiter, darker, warmer, cooler, more saturated, greyish, beige, or yellowish. TRANSPARENT GREY AREA The grey/transparent-looking section of the first bag must remain transparent. Do not turn this area into solid grey, white, opaque plastic, or another color. The transparent section should realistically show the product pieces inside the bag, similar to the contents shown in Image 2. IMAGE 2 — REFERENCE FOR THE CONTENT INSIDE Use Image 2 only as a reference for the product pieces/content visible inside the transparent section. The pieces inside the bag should resemble the pieces shown in Image 2 in terms of: Shape Size Appearance Quantity/density Natural arrangement Overall visual character Do not copy the packaging design from Image 2. Image 2 is ONLY a reference for what is inside the bag. IMAGE 3 — REFERENCE FOR THE BAG STYLE / PRESENTATION Use Image 3 only as a reference for the physical style and presentation of the bag. I want the first bag to have the same clean, smooth, professional bag appearance and presentation style as Image 3, while keeping the exact design, colors, artwork, branding, proportions, and identity of Image 1. In other words: Image 1 = exact bag design + exact colors + artwork + branding Image 2 = reference for the pieces visible inside the transparent area Image 3 = reference for the clean, smooth physical bag style and presentation Do not merge or redesign the three references. Each image has a specific role. BAG PRESENTATION Show one complete first bag only. Position it: Perfectly upright Precisely front-facing Horizontally and vertically centered Level and symmetrical With generous, even empty space around it Fully visible with nothing cropped Do not use a three-quarter angle, tilted perspective, or side view. The final bag should look like a professionally manufactured and professionally photographed premium packaging product. REMOVE ALL FOLDING — CRITICAL The first bag must be perfectly smooth, flat, taut, and clean, similar to the smooth bag appearance in Image 3. Completely remove the unwanted folding and deformation visible in Image 1, including: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Sagging Uneven plastic deformation Warping Distorted reflections Make the bag look perfectly prepared for a professional e-commerce/catalogue photograph. Keep only a very subtle, tiny natural fold at the actual opening of the bag, if needed to maintain realism. There should be NO folds or wrinkles across the main front body of the bag. Do not make the bag look inflated, pillow-like, or artificially reshaped. TRANSPARENT WINDOW The transparent/grey area must remain physically realistic and transparent. The pieces inside should be clearly visible through it, while maintaining the exact shape and placement of the transparent area from Image 1. Do not make the transparent section opaque. Do not change its color. Do not add unnecessary reflections that make the contents difficult to see. LIGHTING & FINISH Create a high-end professional studio product photograph with: Soft, even studio lighting Neutral white background Clean exposure Very subtle natural shadow underneath Controlled highlights Matte-to-satin realistic packaging finish Sharp and clean details Natural dimensionality Avoid: Harsh reflections Excessive gloss Dramatic shadows Cinematic color grading Grain Artificial texture Plastic texture Fabric or leather texture Excessive reflections Unnatural highlights ABSOLUTE DESIGN PRESERVATION Do NOT redesign the first bag. Do NOT modify, regenerate, rewrite, replace, simplify, move, stretch, compress, or reinterpret any artwork from Image 1. The first bag must remain visually identical to Image 1 in: colors + artwork + branding + typography + graphics + proportions + structure + transparent area + overall design. The only major changes should be: Remove all unwanted folds and physical deformation from the first bag. Make the bag smooth, flat, taut, and professionally presented like Image 3. Show realistic product pieces inside the transparent section, using Image 2 as the reference for the contents. Keep the transparent/grey area genuinely transparent. Present the result as a premium, realistic studio product photograph. FINAL RESULT The final image should look like the exact first bag from Image 1, with 100% faithful colors and artwork, but professionally flattened and presented in the clean, smooth bag style of Image 3, with the actual product pieces from Image 2 visible through the transparent section. Do not change the first bag's colors or design under any circumstances. no small foldings it has to be perfect

Frequently asked questions

How does the AI beach flag mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic beach flag mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the beach flag?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the beach flag with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Advertising Flag mockup generatorBus Stop Ad mockup generatorBus Shelter Ad mockup generatorSubway Ad mockup generatorSubway Platform Ad mockup generatorTransit Ad mockup generatorBus Shelter Poster mockup generatorTrain Station Ad mockup generatorAirport Ad Display mockup generatorMall Kiosk Sign mockup generatorAll signage & display mockups →