AI cellophane bag mockup generator

Cellophane Bag mockups, generated — not templated

A clear cellophane bag lets a product sell itself right on the shelf, while a printed sticker or twist tie still carries the brand. This mockup shows your cellophane bag design realistically staged so you can preview the print before ordering.

  • Photorealistic lighting, shadows and materials
  • Upload your own design, logo or artwork
  • Any scene you can describe — no template hunting
  • Edit, restage, upscale and animate afterwards
AI-generated cellophane bag mockup sample

Generated with Mockup Generator — “A small item sealed in a clear cellophane bag tied with a ribbon, sitting on a w…”

Prompt ideas to start from

“A small item sealed in a clear cellophane bag tied with a ribbon, sitting on a wooden market table beside a handful of dried flowers, soft natural daylight, featuring a tasteful sample brand sticker on the bag, photographed at a close three-quarter angle, no watermarks, no text overlays”Use this prompt “Cellophane bag stacked in a small pile on a shelf”Use this prompt “Cellophane bag held in one hand, bright daylight”Use this prompt “Row of cellophane bags on a farmers market table”Use this prompt

Fresh from the community

Create a premium, photorealistic, high-resolution studio product image using the uploaded reference images. IMAGE REFERENCE PRIORITY IMAGE 1 — PRIMARY REFERENCE: BAG DESIGN + COLORS Image 1 is the absolute reference for the first bag itself. Keep the first bag exactly the same as Image 1, including: Exact colors, shades, tones, and gradients All artwork and graphic elements Logo and branding Typography and written information Patterns and illustrations Packaging shape and proportions Dimensions and structure Seals, edges, cut-outs, and hanging hole Placement, spacing, and margins Overall visual identity DO NOT CHANGE THE COLORS OF IMAGE 1 IN ANY WAY. The extremely light/pale colors must remain exactly as they appear in Image 1. Do not make them whiter, darker, warmer, cooler, more saturated, greyish, beige, or yellowish. TRANSPARENT GREY AREA The grey/transparent-looking section of the first bag must remain transparent. Do not turn this area into solid grey, white, opaque plastic, or another color. The transparent section should realistically show the product pieces inside the bag, similar to the contents shown in Image 2. IMAGE 2 — REFERENCE FOR THE CONTENT INSIDE Use Image 2 only as a reference for the product pieces/content visible inside the transparent section. The pieces inside the bag should resemble the pieces shown in Image 2 in terms of: Shape Size Appearance Quantity/density Natural arrangement Overall visual character Do not copy the packaging design from Image 2. Image 2 is ONLY a reference for what is inside the bag. IMAGE 3 — REFERENCE FOR THE BAG STYLE / PRESENTATION Use Image 3 only as a reference for the physical style and presentation of the bag. I want the first bag to have the same clean, smooth, professional bag appearance and presentation style as Image 3, while keeping the exact design, colors, artwork, branding, proportions, and identity of Image 1. In other words: Image 1 = exact bag design + exact colors + artwork + branding Image 2 = reference for the pieces visible inside the transparent area Image 3 = reference for the clean, smooth physical bag style and presentation Do not merge or redesign the three references. Each image has a specific role. BAG PRESENTATION Show one complete first bag only. Position it: Perfectly upright Precisely front-facing Horizontally and vertically centered Level and symmetrical With generous, even empty space around it Fully visible with nothing cropped Do not use a three-quarter angle, tilted perspective, or side view. The final bag should look like a professionally manufactured and professionally photographed premium packaging product. REMOVE ALL FOLDING — CRITICAL The first bag must be perfectly smooth, flat, taut, and clean, similar to the smooth bag appearance in Image 3. Completely remove the unwanted folding and deformation visible in Image 1, including: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Sagging Uneven plastic deformation Warping Distorted reflections Make the bag look perfectly prepared for a professional e-commerce/catalogue photograph. Keep only a very subtle, tiny natural fold at the actual opening of the bag, if needed to maintain realism. There should be NO folds or wrinkles across the main front body of the bag. Do not make the bag look inflated, pillow-like, or artificially reshaped. TRANSPARENT WINDOW The transparent/grey area must remain physically realistic and transparent. The pieces inside should be clearly visible through it, while maintaining the exact shape and placement of the transparent area from Image 1. Do not make the transparent section opaque. Do not change its color. Do not add unnecessary reflections that make the contents difficult to see. LIGHTING & FINISH Create a high-end professional studio product photograph with: Soft, even studio lighting Neutral white background Clean exposure Very subtle natural shadow underneath Controlled highlights Matte-to-satin realistic packaging finish Sharp and clean details Natural dimensionality Avoid: Harsh reflections Excessive gloss Dramatic shadows Cinematic color grading Grain Artificial texture Plastic texture Fabric or leather texture Excessive reflections Unnatural highlights ABSOLUTE DESIGN PRESERVATION Do NOT redesign the first bag. Do NOT modify, regenerate, rewrite, replace, simplify, move, stretch, compress, or reinterpret any artwork from Image 1. The first bag must remain visually identical to Image 1 in: colors + artwork + branding + typography + graphics + proportions + structure + transparent area + overall design. The only major changes should be: Remove all unwanted folds and physical deformation from the first bag. Make the bag smooth, flat, taut, and professionally presented like Image 3. Show realistic product pieces inside the transparent section, using Image 2 as the reference for the contents. Keep the transparent/grey area genuinely transparent. Present the result as a premium, realistic studio product photograph. FINAL RESULT The final image should look like the exact first bag from Image 1, with 100% faithful colors and artwork, but professionally flattened and presented in the clean, smooth bag style of Image 3, with the actual product pieces from Image 2 visible through the transparent section. Do not change the first bag's colors or design under any circumstances. no small foldings it has to be perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded reference images. IMAGE REFERENCE PRIORITY IMAGE 1 — PRIMARY REFERENCE: BAG DESIGN + COLORS Image 1 is the absolute reference for the first bag itself. Keep the first bag exactly the same as Image 1, including: Exact colors, shades, tones, and gradients All artwork and graphic elements Logo and branding Typography and written information Patterns and illustrations Packaging shape and proportions Dimensions and structure Seals, edges, cut-outs, and hanging hole Placement, spacing, and margins Overall visual identity DO NOT CHANGE THE COLORS OF IMAGE 1 IN ANY WAY. The extremely light/pale colors must remain exactly as they appear in Image 1. Do not make them whiter, darker, warmer, cooler, more saturated, greyish, beige, or yellowish. TRANSPARENT GREY AREA The grey/transparent-looking section of the first bag must remain transparent. Do not turn this area into solid grey, white, opaque plastic, or another color. The transparent section should realistically show the product pieces inside the bag, similar to the contents shown in Image 2. IMAGE 2 — REFERENCE FOR THE CONTENT INSIDE Use Image 2 only as a reference for the product pieces/content visible inside the transparent section. The pieces inside the bag should resemble the pieces shown in Image 2 in terms of: Shape Size Appearance Quantity/density Natural arrangement Overall visual character Do not copy the packaging design from Image 2. Image 2 is ONLY a reference for what is inside the bag. IMAGE 3 — REFERENCE FOR THE BAG STYLE / PRESENTATION Use Image 3 only as a reference for the physical style and presentation of the bag. I want the first bag to have the same clean, smooth, professional bag appearance and presentation style as Image 3, while keeping the exact design, colors, artwork, branding, proportions, and identity of Image 1. In other words: Image 1 = exact bag design + exact colors + artwork + branding Image 2 = reference for the pieces visible inside the transparent area Image 3 = reference for the clean, smooth physical bag style and presentation Do not merge or redesign the three references. Each image has a specific role. BAG PRESENTATION Show one complete first bag only. Position it: Perfectly upright Precisely front-facing Horizontally and vertically centered Level and symmetrical With generous, even empty space around it Fully visible with nothing cropped Do not use a three-quarter angle, tilted perspective, or side view. The final bag should look like a professionally manufactured and professionally photographed premium packaging product. REMOVE ALL FOLDING — CRITICAL The first bag must be perfectly smooth, flat, taut, and clean, similar to the smooth bag appearance in Image 3. Completely remove the unwanted folding and deformation visible in Image 1, including: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Sagging Uneven plastic deformation Warping Distorted reflections Make the bag look perfectly prepared for a professional e-commerce/catalogue photograph. Keep only a very subtle, tiny natural fold at the actual opening of the bag, if needed to maintain realism. There should be NO folds or wrinkles across the main front body of the bag. Do not make the bag look inflated, pillow-like, or artificially reshaped. TRANSPARENT WINDOW The transparent/grey area must remain physically realistic and transparent. The pieces inside should be clearly visible through it, while maintaining the exact shape and placement of the transparent area from Image 1. Do not make the transparent section opaque. Do not change its color. Do not add unnecessary reflections that make the contents difficult to see. LIGHTING & FINISH Create a high-end professional studio product photograph with: Soft, even studio lighting Neutral white background Clean exposure Very subtle natural shadow underneath Controlled highlights Matte-to-satin realistic packaging finish Sharp and clean details Natural dimensionality Avoid: Harsh reflections Excessive gloss Dramatic shadows Cinematic color grading Grain Artificial texture Plastic texture Fabric or leather texture Excessive reflections Unnatural highlights ABSOLUTE DESIGN PRESERVATION Do NOT redesign the first bag. Do NOT modify, regenerate, rewrite, replace, simplify, move, stretch, compress, or reinterpret any artwork from Image 1. The first bag must remain visually identical to Image 1 in: colors + artwork + branding + typography + graphics + proportions + structure + transparent area + overall design. The only major changes should be: Remove all unwanted folds and physical deformation from the first bag. Make the bag smooth, flat, taut, and professionally presented like Image 3. Show realistic product pieces inside the transparent section, using Image 2 as the reference for the contents. Keep the transparent/grey area genuinely transparent. Present the result as a premium, realistic studio product photograph. FINAL RESULT The final image should look like the exact first bag from Image 1, with 100% faithful colors and artwork, but professionally flattened and presented in the clean, smooth bag style of Image 3, with the actual product pieces from Image 2 visible through the transparent section. Do not change the first bag's colors or design under any circumstances. no small foldings it has to be perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded reference images. IMAGE REFERENCE PRIORITY IMAGE 1 — PRIMARY REFERENCE: BAG DESIGN + COLORS Image 1 is the absolute reference for the first bag itself. Keep the first bag exactly the same as Image 1, including: Exact colors, shades, tones, and gradients All artwork and graphic elements Logo and branding Typography and written information Patterns and illustrations Packaging shape and proportions Dimensions and structure Seals, edges, cut-outs, and hanging hole Placement, spacing, and margins Overall visual identity DO NOT CHANGE THE COLORS OF IMAGE 1 IN ANY WAY. The extremely light/pale colors must remain exactly as they appear in Image 1. Do not make them whiter, darker, warmer, cooler, more saturated, greyish, beige, or yellowish. TRANSPARENT GREY AREA The grey/transparent-looking section of the first bag must remain transparent. Do not turn this area into solid grey, white, opaque plastic, or another color. The transparent section should realistically show the product pieces inside the bag, similar to the contents shown in Image 2. IMAGE 2 — REFERENCE FOR THE CONTENT INSIDE Use Image 2 only as a reference for the product pieces/content visible inside the transparent section. The pieces inside the bag should resemble the pieces shown in Image 2 in terms of: Shape Size Appearance Quantity/density Natural arrangement Overall visual character Do not copy the packaging design from Image 2. Image 2 is ONLY a reference for what is inside the bag. IMAGE 3 — REFERENCE FOR THE BAG STYLE / PRESENTATION Use Image 3 only as a reference for the physical style and presentation of the bag. I want the first bag to have the same clean, smooth, professional bag appearance and presentation style as Image 3, while keeping the exact design, colors, artwork, branding, proportions, and identity of Image 1. In other words: Image 1 = exact bag design + exact colors + artwork + branding Image 2 = reference for the pieces visible inside the transparent area Image 3 = reference for the clean, smooth physical bag style and presentation Do not merge or redesign the three references. Each image has a specific role. BAG PRESENTATION Show one complete first bag only. Position it: Perfectly upright Precisely front-facing Horizontally and vertically centered Level and symmetrical With generous, even empty space around it Fully visible with nothing cropped Do not use a three-quarter angle, tilted perspective, or side view. The final bag should look like a professionally manufactured and professionally photographed premium packaging product. REMOVE ALL FOLDING — CRITICAL The first bag must be perfectly smooth, flat, taut, and clean, similar to the smooth bag appearance in Image 3. Completely remove the unwanted folding and deformation visible in Image 1, including: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Sagging Uneven plastic deformation Warping Distorted reflections Make the bag look perfectly prepared for a professional e-commerce/catalogue photograph. Keep only a very subtle, tiny natural fold at the actual opening of the bag, if needed to maintain realism. There should be NO folds or wrinkles across the main front body of the bag. Do not make the bag look inflated, pillow-like, or artificially reshaped. TRANSPARENT WINDOW The transparent/grey area must remain physically realistic and transparent. The pieces inside should be clearly visible through it, while maintaining the exact shape and placement of the transparent area from Image 1. Do not make the transparent section opaque. Do not change its color. Do not add unnecessary reflections that make the contents difficult to see. LIGHTING & FINISH Create a high-end professional studio product photograph with: Soft, even studio lighting Neutral white background Clean exposure Very subtle natural shadow underneath Controlled highlights Matte-to-satin realistic packaging finish Sharp and clean details Natural dimensionality Avoid: Harsh reflections Excessive gloss Dramatic shadows Cinematic color grading Grain Artificial texture Plastic texture Fabric or leather texture Excessive reflections Unnatural highlights ABSOLUTE DESIGN PRESERVATION Do NOT redesign the first bag. Do NOT modify, regenerate, rewrite, replace, simplify, move, stretch, compress, or reinterpret any artwork from Image 1. The first bag must remain visually identical to Image 1 in: colors + artwork + branding + typography + graphics + proportions + structure + transparent area + overall design. The only major changes should be: Remove all unwanted folds and physical deformation from the first bag. Make the bag smooth, flat, taut, and professionally presented like Image 3. Show realistic product pieces inside the transparent section, using Image 2 as the reference for the contents. Keep the transparent/grey area genuinely transparent. Present the result as a premium, realistic studio product photograph. FINAL RESULT The final image should look like the exact first bag from Image 1, with 100% faithful colors and artwork, but professionally flattened and presented in the clean, smooth bag style of Image 3, with the actual product pieces from Image 2 visible through the transparent section. Do not change the first bag's colors or design under any circumstances. no small foldings it has to be perfect, the fist image has to be the same dont change places or colors or sizes
Create a premium, photorealistic, high-resolution studio product image using the uploaded reference images. IMAGE REFERENCE PRIORITY IMAGE 1 — PRIMARY REFERENCE: BAG DESIGN + COLORS Image 1 is the absolute reference for the first bag itself. Keep the first bag exactly the same as Image 1, including: Exact colors, shades, tones, and gradients All artwork and graphic elements Logo and branding Typography and written information Patterns and illustrations Packaging shape and proportions Dimensions and structure Seals, edges, cut-outs, and hanging hole Placement, spacing, and margins Overall visual identity DO NOT CHANGE THE COLORS OF IMAGE 1 IN ANY WAY. The extremely light/pale colors must remain exactly as they appear in Image 1. Do not make them whiter, darker, warmer, cooler, more saturated, greyish, beige, or yellowish. TRANSPARENT GREY AREA The grey/transparent-looking section of the first bag must remain transparent. Do not turn this area into solid grey, white, opaque plastic, or another color. The transparent section should realistically show the product pieces inside the bag, similar to the contents shown in Image 2. IMAGE 2 — REFERENCE FOR THE CONTENT INSIDE Use Image 2 only as a reference for the product pieces/content visible inside the transparent section. The pieces inside the bag should resemble the pieces shown in Image 2 in terms of: Shape Size Appearance Quantity/density Natural arrangement Overall visual character Do not copy the packaging design from Image 2. Image 2 is ONLY a reference for what is inside the bag. IMAGE 3 — REFERENCE FOR THE BAG STYLE / PRESENTATION Use Image 3 only as a reference for the physical style and presentation of the bag. I want the first bag to have the same clean, smooth, professional bag appearance and presentation style as Image 3, while keeping the exact design, colors, artwork, branding, proportions, and identity of Image 1. In other words: Image 1 = exact bag design + exact colors + artwork + branding Image 2 = reference for the pieces visible inside the transparent area Image 3 = reference for the clean, smooth physical bag style and presentation Do not merge or redesign the three references. Each image has a specific role. BAG PRESENTATION Show one complete first bag only. Position it: Perfectly upright Precisely front-facing Horizontally and vertically centered Level and symmetrical With generous, even empty space around it Fully visible with nothing cropped Do not use a three-quarter angle, tilted perspective, or side view. The final bag should look like a professionally manufactured and professionally photographed premium packaging product. REMOVE ALL FOLDING — CRITICAL The first bag must be perfectly smooth, flat, taut, and clean, similar to the smooth bag appearance in Image 3. Completely remove the unwanted folding and deformation visible in Image 1, including: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Sagging Uneven plastic deformation Warping Distorted reflections Make the bag look perfectly prepared for a professional e-commerce/catalogue photograph. Keep only a very subtle, tiny natural fold at the actual opening of the bag, if needed to maintain realism. There should be NO folds or wrinkles across the main front body of the bag. Do not make the bag look inflated, pillow-like, or artificially reshaped. TRANSPARENT WINDOW The transparent/grey area must remain physically realistic and transparent. The pieces inside should be clearly visible through it, while maintaining the exact shape and placement of the transparent area from Image 1. Do not make the transparent section opaque. Do not change its color. Do not add unnecessary reflections that make the contents difficult to see. LIGHTING & FINISH Create a high-end professional studio product photograph with: Soft, even studio lighting Neutral white background Clean exposure Very subtle natural shadow underneath Controlled highlights Matte-to-satin realistic packaging finish Sharp and clean details Natural dimensionality Avoid: Harsh reflections Excessive gloss Dramatic shadows Cinematic color grading Grain Artificial texture Plastic texture Fabric or leather texture Excessive reflections Unnatural highlights ABSOLUTE DESIGN PRESERVATION Do NOT redesign the first bag. Do NOT modify, regenerate, rewrite, replace, simplify, move, stretch, compress, or reinterpret any artwork from Image 1. The first bag must remain visually identical to Image 1 in: colors + artwork + branding + typography + graphics + proportions + structure + transparent area + overall design. The only major changes should be: Remove all unwanted folds and physical deformation from the first bag. Make the bag smooth, flat, taut, and professionally presented like Image 3. Show realistic product pieces inside the transparent section, using Image 2 as the reference for the contents. Keep the transparent/grey area genuinely transparent. Present the result as a premium, realistic studio product photograph. FINAL RESULT The final image should look like the exact first bag from Image 1, with 100% faithful colors and artwork, but professionally flattened and presented in the clean, smooth bag style of Image 3, with the actual product pieces from Image 2 visible through the transparent section. Do not change the first bag's colors or design under any circumstances. no small foldings it has to be perfect, the fist image has to be the same dont change places or colors or sizes
Create a realistic product mockup based on these instructions: Design a tote bag nestled among beautifully wrapped gifts and vibrant flowers, showcasing a harmonious blend of textures and colors. The bag should feature an intricate floral pattern, complemented by pastel shades. Surround it with an array of ribbons, gift boxes, and blooming petals, creating an inviting, celebratory atmosphere. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
Create a realistic product mockup based on these instructions: Create a detailed mock-up of a stylish tote bag featuring a vibrant floral pattern on the fabric. The design should showcase both sides of the tote, highlighting sturdy, eco-friendly materials. Incorporate a soft, natural color palette and add a minimalist logo in the center for branding. Show it set against a light, inviting backdrop. Create a professional, photorealistic mockup scene. Since no design image was provided, show the product/scene with a placeholder or blank surface where a design would typically go.
A photorealistic rectangular bean bag mockup fatboy style
A photorealistic food pouch mockupthe dementions are 4.75inches by 7.75 inches have the back ground of santas workshop these are eld sprinkles where you lick a candy cane and dip in into the elf sprinkles. can you have a candy cane beside the bag that matches the colorso f the bag
i want the design in the first image like the packaging in the second image on white background, remove foldings on the bag, make it perfect
i want the design in the first image like the packaging in the second image on white background, remove foldings on the bag, make it perfect
i want the design in the first image like the packaging in the second image on white background, remove foldings on the bag, make it perfect
i want the design in the first image like the packaging in the second image on white background, remove foldings on the bag, make it perfect
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
Create a **premium, photorealistic, high-resolution studio product image** using the uploaded images/files as exact product references. **DO NOT CHANGE THE COLORS AT ALL.** The final result must look like a professionally retouched **e-commerce and catalogue product photograph**: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. ## IMAGE REFERENCE PRIORITY There are three reference images, and each has a different role: ### IMAGE 1 — ABSOLUTE PRIMARY REFERENCE **Image 1 is the EDIT TARGET and the absolute primary reference for the packaging.** Use Image 1 EXACTLY for: * All colors * Light/pale colors * Shades and tones * Gradients * Artwork * Branding * Logo * Typography * Patterns * Graphic elements * Packaging shape * Structure * Proportions * Dimensions * Seals * Edges * Cut-outs * Hanging holes * Labels * Margins * Spacing * Overall visual identity **THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY.** This is extremely important: **DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1.** In particular, preserve the **very light/pale colors exactly as they appear in Image 1**. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. ### IMAGE 2 — INTERNAL PRODUCT REFERENCE Use Image 2 **ONLY** as the reference for the actual product pieces that will be placed inside the packaging. Place **5 pieces of the Image 2 product inside the bag**, at a realistic and proportional scale. ### IMAGE 3 — STYLE / PRESENTATION REFERENCE ONLY Use Image 3 **ONLY as a reference for the style, structure, and presentation of the bag**. Image 3 must NOT be used as a reference for: * Colors * Artwork * Graphics * Patterns * Branding * Typography * Visual identity **Do NOT copy any colors from Image 3.** The final bag should have the **presentation/style of Image 3**, but the **exact colors and complete design of Image 1**. --- # PRODUCT PRESENTATION Show **one complete product**. * Position it perfectly upright and precisely front-facing. * Center it horizontally and vertically. * Make it level, balanced, and symmetrical. * Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details. * Correct the camera angle and perspective so the product appears professionally photographed straight-on. * Leave generous and evenly distributed empty space around the product. * Do not crop any part of the packaging. * Do not tilt or lean the packaging. * Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — **not inflated, pillow-like, distorted, or artificially reshaped.** --- # TRANSPARENT GREY AREA The **grey section on the first bag in Image 1 must be completely TRANSPARENT**. It must function as a realistic transparent packaging window. **Do NOT render this area as grey, opaque, white, frosted, or semi-opaque.** Through this transparent section, place **5 pieces of the product from Image 2 inside the bag**. The 5 pieces must: * Be correctly scaled relative to the bag. * Be naturally arranged inside the packaging. * Look physically contained inside the bag. * Have realistic depth and positioning. * Be proportional to the actual packaging. Position the 5 pieces so that **only their pattern/visual appearance is visible through the transparent window**. The **text, labels, and unnecessary details on the internal products should be hidden by their positioning and scale**, similar to the visual effect shown in Image 3. Do not allow the internal products to look oversized or unrealistic. --- # PACKAGING SURFACE Make the front of the packaging perfectly smooth, flat, taut, and evenly presented. Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions The packaging should look professionally prepared and perfectly positioned for a premium catalogue photograph. Use a clean **matte-to-satin finish** with only extremely subtle and controlled highlights. Do not add: * Visible plastic texture * Grain * Fabric texture * Leather texture * Embossing * Artificial surface texture --- # ARTWORK PRESERVATION Preserve the supplied product design **exactly as provided in Image 1**. Keep completely unchanged: * Brand logo * Product name * Typography * All written information * Product photographs * Illustrations * Icons * Symbols * Colors * Gradients * Patterns * Graphic elements * Artwork proportions * Margins * Spacing * Flavor information * Net weight * Label placement * Packaging proportions The complete artwork must appear: * Flat * Sharp * Correctly aligned * Undistorted * Professionally printed * Fully readable where visible **Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork.** Do not invent missing details. --- # COLOR ACCURACY — CRITICAL **IMAGE 1 IS THE COLOR MASTER.** The final image must preserve the **exact colors of Image 1**. Do not apply any cinematic Remove all: * Folds * Wrinkles * Creases * Dents * Bulges * Ripples * Waves * Crumpled areas * Uneven reflections * Surface distortions remove the folds completly make it look perfect, only keep very small fold where the bag opens, not on the top
# Productontwerp — 38L All-Round Modular Sport Duffel / Backpack **Werkdocument / Product Design Specification** **Versie:** 1.0 **Producttype:** Premium sporttas / duffel met verticale backpackmodus **Doelvolume:** 38 liter **Primaire gebruikssituaties:** fitness, zwemmen, teamsport, padel/tennis, woon-werk + sport **Ontwerprichting:** premium sportief, clean, georganiseerd, modulair --- ## 1. Productvisie Deze sporttas is ontworpen rond één centraal probleem: **klassieke sporttassen veranderen snel in één grote, rommelige ruimte waarin droge kleding, nat textiel, schoenen, verzorgingsproducten, drinkflessen en waardevolle spullen door elkaar terechtkomen.** Het product lost dit op met een intelligent zonesysteem zonder de tas op te delen in een groot aantal kleine, rigide compartimenten. De kernbelofte is: > **Eén compacte all-round sporttas waarin droog, nat, vuil, drinken, verzorging en waardevolle spullen logisch van elkaar gescheiden blijven.** De tas combineert het herkenbare, eenvoudige silhouet van een moderne sportduffel met een veel geavanceerdere interne architectuur en drie volwaardige draagwijzen: 1. **Duffel / hand carry** 2. **Shoulder carry** 3. **Verticale backpackmodus** De tas heeft een doelvolume van **38 L**. Dit is bewust iets ruimer dan 35 L om comfortabel plaats te bieden aan onder meer EU48-schoenen, droge kleding, een grote katoenen handdoek en een uitneembare natmodule. --- ## 2. Ontwerpprincipes Het ontwerp wordt gestuurd door zeven principes. ### 2.1 Organized, not overcomplicated De tas krijgt niet zoveel mogelijk vakken. Elk vak moet een duidelijk doel hebben. De gebruiker moet intuïtief begrijpen waar iets hoort: - **DRY** — droge kleding - **WET** — nat textiel - **SHOES** — schoenen - **HYDRATE** — drinkfles - **TOILETRY** — douche- en verzorgingsproducten - **QUICK** — spullen die tijdens het sporten snel nodig zijn - **SECURE** — smartphone, sleutels en andere waardevolle spullen ### 2.2 Flexible volume Het natvak en schoenenvak zijn flexibel. Wanneer ze niet worden gebruikt, nemen ze nauwelijks bruikbaar hoofdvolume in. De 38 L wordt dus dynamisch verdeeld afhankelijk van de sportactiviteit. ### 2.3 Clean versus dirty separation Droge kleding mag niet in contact komen met: - natte zwemkleding; - een vochtige handdoek; - vuile schoenen; - lekkende shampoo; - een lekkende drinkfles. ### 2.4 True dual-mode design De backpackfunctie wordt niet als extra feature achteraf toegevoegd. De tas moet zowel horizontaal als duffel als verticaal als rugzak logisch functioneren. ### 2.5 Easy cleaning Zones die in contact komen met vocht, schoenen of verzorgingsproducten moeten eenvoudig afwasbaar zijn. ### 2.6 Premium restraint De buitenkant blijft visueel rustig. Geen overvloed aan zichtbare mesh, externe elastieken, losse banden of grote contrasterende logo’s. ### 2.7 Floor protection De tas moet bruikbaar zijn in natte kleedkamers zonder dat het textiel rechtstreeks op de vloer rust. --- # 3. Positionering ## 3.1 Productcategorie Premium georganiseerde sportduffel / gym bag / swim bag / convertible backpack. ## 3.2 Hoofdgebruiker Een actieve gebruiker die verschillende sporten combineert en één hoogwaardige tas wil gebruiken voor onder andere: - fitness; - zwemmen; - padel of tennis; - voetbal of andere teamsporten; - sport na het werk; - korte wellness- of saunabezoeken; - lichte weekend- of overnight use. ## 3.3 Belangrijkste onderscheid Niet: > “Een sporttas met veel vakken.” Wel: > **Een adaptief organisatiesysteem dat clean, wet, shoes, hydration, toiletries en valuables fysiek van elkaar scheidt zonder het hoofdvolume te versnipperen.** --- # 4. Vorm en proporties ## 4.1 Algemene vorm De tas krijgt een **licht gestructureerde rechthoekige duffelvorm**. Kenmerken: - afgeronde hoeken; - relatief vlakke boven- en onderzijde; - zachte maar vormvaste zijwanden; - voldoende structuur om halfleeg niet volledig in te zakken; - geen harde koffervorm; - premium sportieve uitstraling. De visuele inspiratie komt uit de eenvoud en draagbaarheid van moderne zwarte sportduffels, maar het product krijgt een duidelijk eigen architectuur en design language. ## 4.2 Doelvolume **Nominaal volume: 38 L** De definitieve volumemeting moet na CAD en prototype fysiek worden gevalideerd. ### Indicatieve externe enveloppe Richtwaarde: - **Lengte:** ca. 54–56 cm - **Hoogte:** ca. 29–31 cm - **Diepte:** ca. 23–25 cm Dit zijn ontwerpdoelen, geen definitieve productieafmetingen. De maatvoering moet vooral worden gevalideerd tegen: - EU48 sportschoenen; - grote katoenen badhanddoek; - volledige gymoutfit; - 1 L drinkfles; - toiletry kit; - comfortabele verticale rugligging. --- # 5. Hoofdopening ## 5.1 Grote U-opening Het hoofdvak krijgt geen klassieke smalle rechte ritssluiting. De voorkeur is een **grote U-vormige ritssluiting** over de bovenzijde en gedeeltelijk langs de zijkanten. ### Doel Wanneer de gebruiker de tas opent: - is vrijwel de volledige inhoud zichtbaar; - kan kleding gestapeld worden in plaats van gepropt; - zijn de verschillende zones makkelijk bereikbaar; - hoeft de gebruiker niet diep in een donkere tas te zoeken. De opening moet stevig genoeg zijn om zijn vorm te behouden en soepel genoeg om met één hand verder te openen. ## 5.2 Rits Voorkeur: - dubbele zipper sliders; - robuuste premium coil zipper; - grote tactiele zipper pulls; - glove-friendly grip; - bij voorkeur water-resistant zipper tape op kritische buitenvakken. --- # 6. Interne architectuur De tas bestaat uit één centraal **Dry hoofdvolume**, omringd door functionele zones. Conceptueel: ```text HORIZONTALE DUFFELMODUS ┌──────────────────────────────────────────┐ │ QUICK / TOILETRY / EXTERNAL ACCESS │ ├──────────────────────────────────────────┤ │ │ │ DRY MAIN ZONE │ │ │ │ [removable WET module] │ │ │ ├───────────────┬──────────────────────────┤ │ SHOE TUNNEL │ flexible expansion │ └───────────────┴──────────────────────────┘ ``` En in verticale backpackmodus: ```text VERTICALE BACKPACKMODUS ┌─────────────────────────┐ │ QUICK ACCESS │ ├─────────────────────────┤ │ TOILETRY / DRY │ │ │ BACK → │ DRY MAIN ZONE │ │ + removable WET module │ │ │ ├─────────────────────────┤ │ SHOE ZONE │ └─────────────────────────┘ ↓ verticale bodem ``` --- # 7. DRY Zone — centraal hoofdvak ## 7.1 Functie Het grootste compartiment is voor alles wat schoon en droog moet blijven. Voorbeelden: - T-shirt; - sportbroek; - hoodie; - sokken; - ondergoed; - droge handdoek; - extra kleding; - kleine sportaccessoires. ## 7.2 Volume De Dry Zone gebruikt het resterende centrale volume. Bij maximale bezetting van Wet en Shoes zal het bruikbare Dry-volume kleiner zijn. Wanneer één of beide modules leeg zijn, groeit het hoofdvak automatisch. Doelwaarde bij normaal volledig gebruik: **ca. 20–24 L bruikbaar centraal volume** ## 7.3 Binnenvoering Voorkeur voor een **middellichte grijze of stone-grey voering**. Reden: - zwarte spullen zijn beter zichtbaar; - vuil blijft minder zichtbaar dan op wit; - premium contrast zonder een fel gekleurde binnenkant. ## 7.4 Interne organisatie Bewust beperkt: - één plat meshvak voor ondergoed/sokken; - één klein plat organizer-vak; - optioneel één verstelbare compressieriem. Geen groot raster van kleine vakjes. --- # 8. WET Zone — uitneembare natmodule ## 8.1 Doel Volledig gescheiden opslag voor: - natte zwemkleding; - grote natte katoenen badhanddoek; - vochtige sportkleding; - eventueel natte slippers wanneer gewenst. ## 8.2 Capaciteit Maximale expansie: **ca. 9–10 L** De pouch moet groot genoeg zijn voor een **grote katoenen badhanddoek + zwemkleding**. ## 8.3 Flexibele constructie De Wet Zone is geen vast hard compartiment. Wanneer leeg: - ligt de module grotendeels plat; - blijft het centrale volume beschikbaar. Wanneer gevuld: - expandeert de module naar het hoofdvolume; - blijft de natte inhoud fysiek geïsoleerd. ## 8.4 Uitneembaar De module moet volledig uit de tas kunnen worden gehaald. Voorkeursbevestiging: - 4 lage snap-/hook-points; - of een combinatie van 2 onderste locator tabs + 2 bovenste snaps. Geen volledige perimeter-rits als dat het verwijderen vertraagt. Doel: **module verwijderen in enkele seconden.** ## 8.5 Constructie Wet Pouch Gewenste eigenschappen: - waterproof of zeer sterk water-resistant binnenmateriaal; - gelaste of getapete naden waar praktisch; - brede opening; - gladde afwasbare binnenzijde; - zo min mogelijk vuilvangende naden; - ophanglus; - open te leggen of binnenstebuiten te keren voor reiniging; - zelfstandig te hanteren buiten de tas. ## 8.6 Sluiting Voorkeur: - brede dubbele rits met beschermde zipper garage; of - hybrid fold/roll closure indien dit aantoonbaar beter presteert op lekkage. De pouch moet water binnenhouden tijdens normaal transport, maar is niet bedoeld als gecertificeerde drybag voor volledige onderdompeling. ## 8.7 Ventilatie De Wet Pouch moet na gebruik volledig verwijderd en geopend kunnen worden om te drogen. De tas mag niet afhankelijk zijn van passieve ventilatie terwijl nat textiel urenlang opgesloten zit. --- # 9. SHOE Zone — EU48 schoenentunnel ## 9.1 Doel Apart compartiment voor sportschoenen zodat vuil, stof en geur niet in het Dry-hoofdvak terechtkomen. ## 9.2 Schoenmaat Ontwerpen voor minimaal: **EU maat 48** De maatvalidatie moet gebeuren met meerdere schoentypen: - lage gymschoen; - volumineuze running shoe; - indoor court shoe; - eventueel voetbal-/trainingsschoen zonder extreem lange studs. ## 9.3 Constructie De Shoe Zone start aan één korte zijde van de duffel en vormt een flexibele tunnel die naar het hoofdvolume expandeert. Leeg: - vrijwel vlak. Gevuld: - schoenen nemen alleen het volume in dat werkelijk nodig is. ## 9.4 Voering - donker; - slijtvast; - makkelijk afwasbaar; - vochtbestendig. ## 9.5 Ventilatie Geen groot zichtbaar meshpaneel. Voorkeur voor: - subtiele laser-cut perforaties; - verborgen ventilatiegaten achter een structureel paneel; - een perforatiepatroon dat deel uitmaakt van de visuele identiteit. De ventilatie moet worden beschermd tegen directe waterinloop vanaf de bodem. --- # 10. TOILETRY Zone — apart en direct bereikbaar ## 10.1 Doel Een zelfstandig compartiment voor douche- en verzorgingsproducten. Voorbeelden: - shampoo; - douchegel; - deodorant; - gezichtsverzorging; - kam; - kleine tube crème; - scheeraccessoires. ## 10.2 Locatie Aan de buitenzijde van de bovenste helft van de tas in backpackmodus. Het vak moet bereikbaar zijn terwijl: - de tas horizontaal op een bank staat; - de tas verticaal naast een locker staat; - het hoofdvak gesloten blijft. ## 10.3 Volume Richtwaarde: **ca. 2–3 L** ## 10.4 Interne indeling Voorkeur: - 2 elastische verticale bottle loops; - 1 klein mesh-/stretchvak; - 1 vlak waterproof mini-pocket; - voldoende vrije ruimte voor deodorant of toiletry bottle. ## 10.5 Lekbescherming Het compartiment moet een eigen afwasbare liner hebben. Aanbevolen: - gelamineerde voering; - opstaande interne rand; - zo weinig mogelijk doorstiksels naar het hoofdvak. Doel: lekkende shampoo moet zo veel mogelijk beperkt blijven tot deze zone. --- # 11. HYDRATE Zone — verzonken bottle chamber ## 11.1 Doel Gescheiden opslag van drinkfles zodat condens of lekkage niet bij droge kleding komt. ## 11.2 Flescompatibiliteit Ontwerpdoel: - standaard gymflessen; - bidons; - grote 1 L sportfles. ## 11.3 Oriëntatieprobleem De tas verandert 90° van oriëntatie tussen duffel- en backpackmodus. Daarom mag de fles niet afhankelijk zijn van één vaste zwaartekrachtrichting. ## 11.4 Oplossing Een **gesloten, verzonken bottle chamber** met: - water-resistant liner; - elastische interne retentie; - volledige rits; - beperkte expansie naar binnen; - vlak profiel wanneer leeg. Duffelmodus: fles ligt grotendeels horizontaal. Backpackmodus: fles komt grotendeels verticaal te staan. ## 11.5 Visueel Geen zichtbaar elastisch mesh-flesvak. Wanneer gesloten moet het compartiment vrijwel verdwijnen in het silhouet. --- # 12. SECURE Zone — verborgen anti-diefstalvak ## 12.1 Doel Veilige opslag voor: - smartphone; - sleutels; - portefeuille; - oordopjes; - locker card; - pasjes. ## 12.2 Locatie In het **rugpaneel**, aan de lichaamszijde van de tas. Wanneer de tas als backpack wordt gedragen bevindt het vak zich tussen gebruiker en tasinhoud. ## 12.3 Toegang De rits wordt visueel verborgen door: - overlap; - seam integration; - of plaatsing onder een structurele webbinglijn. Geen opvallende externe zipper pull. ## 12.4 Interne organisatie Minimaal: - zacht gevoerd smartphonevak; - apart sleuteldeel; - geïntegreerde key leash/clip; - klein vlak vak voor portefeuille/pasjes. Sleutels mogen niet tegen het smartphonescherm kunnen schuren. ## 12.5 Padding Lichte foamlaag tegen impact. Geen overdreven dikke constructie die de tas volumineus maakt. --- # 13. QUICK Zone — directe sporttoegang ## 13.1 Doel Spullen die tijdens een workout snel gepakt worden zonder het hoofdvak te openen. Voorbeelden: - AirPods/oordopjes; - lifting straps; - wrist wraps; - locker card; - sporthorloge; - grip accessories; - kleine magnesium pouch indien goed afgesloten. ## 13.2 Locatie Bovenste zone van de tas, bereikbaar in zowel: - horizontale duffelmodus; - verticale backpackmodus. ## 13.3 Formaat Compact en vlak. Geen groot universeel dump pocket dat opnieuw rommelig wordt. --- # 14. Draagmodi ## 14.1 Hand carry Twee stevige carry handles. Eigenschappen: - brede webbing; - comfortabele handgrip; - gevoerde of gevormde handle wrap; - minimale beweging; - voldoende ruimte voor grotere handen. ## 14.2 Shoulder carry Afneembare verstelbare schouderriem. Eigenschappen: - breed; - gevoerd schouderpad; - draaibare metalen of hoogwaardige polymer hooks; - bevestigingspunten geïntegreerd in structurele naden. ## 14.3 Backpackmodus De tas wordt **90° gedraaid en verticaal gedragen**. ### Strap-systeem De backpack straps: - blijven bovenaan permanent aan de tas bevestigd; - worden onderaan met clips vastgezet; - kunnen onderaan worden losgeklikt; - verdwijnen daarna omhoog achter een verborgen rugpaneel met rits. Dit voorkomt: - losse straps; - verliesbare onderdelen; - visuele rommel in duffelmodus. ### Workflow **Naar backpackmodus** 1. rugpaneel openen; 2. straps uittrekken; 3. onderclips links en rechts vastklikken; 4. lengte afstellen. **Naar duffelmodus** 1. onderclips losmaken; 2. straps omhoog vouwen; 3. straps in rugcompartiment schuiven; 4. rits sluiten. ## 14.4 Rugpaneel Licht gestructureerd en padded. Gewenst: - twee verticale foamzones; - subtiele ventilatiekanalen; - slijtvaste buitenstof; - voldoende stijfheid om lading comfortabel tegen de rug te houden. Geen dikke hiking-backpack constructie. --- # 15. Controle van losse handgrepen in backpackmodus Duffelhandgrepen mogen tijdens backpackgebruik niet los rondhangen. Oplossingsrichtingen: - magnetische keeper; - verborgen snap keeper; - elastische retainer; - smalle handle garage. Voorkeur: een simpele premium oplossing met minimale zichtbaarheid. --- # 16. Bodem en vloerbescherming ## 16.1 Lange bodem — duffelstand De horizontale bodem krijgt: - waterbestendig/slijtvast bodempaneel; - semi-rigide interne bodemplaat; - vijf lage TPU/TPE voetjes. Voorgestelde layout: ```text ●────────────────────● ● ●────────────────────● ``` Vier hoekpunten + één centrale steun. ## 16.2 Waarom vijf voetjes De middelste voet voorkomt dat een zwaar beladen tas in het midden doorbuigt en alsnog de natte vloer raakt. ## 16.3 Verticale bodem — backpackstand Wanneer de tas rechtop wordt gezet, vormt de korte zijde bij de Shoe Zone de tweede bodem. Daarom krijgt deze zijde: - 2 subtiele TPU-bumpers of korte rails; - extra slijtvaste overlay; - voldoende structuur om rechtop te kunnen staan of leunen. ## 16.4 Materiaal voetjes Voorkeur: **TPU/TPE/rubberachtig materiaal** boven hard goedkoop kunststof. Redenen: - stiller; - meer grip; - minder broos; - premium tactility; - betere bescherming van vloer en tas. --- # 17. Structurele opbouw ## 17.1 Semi-rigid, niet hard shell De tas moet vorm houden maar flexibel blijven. Mogelijke constructie: - dun PE/HDPE bodeminzetstuk; - EVA/PE foam in korte zijpanelen; - lichte foamlaminatie in rugpaneel; - piping of folded seam reinforcement rond de U-opening. ## 17.2 Bodemplaat Bij voorkeur uitneembaar voor: - reiniging; - reparatie; - makkelijker wassen; - prototype tuning. De plaat moet afgeronde hoeken hebben zodat ze de voering niet doorsnijdt. --- # 18. Materiaalrichting ## 18.1 Buitenmateriaal Premium technisch textiel, bijvoorbeeld: - high-density recycled nylon; - recycled polyester met stevige weave; - matte PU/TPU backing; - water-resistant finish. Doel: - mat, niet glanzend; - slijtvast; - vormvast; - makkelijk afneembaar; - premium handfeel. ## 18.2 Bodem Steviger materiaal dan het hoofdtextiel. Opties: - TPU-coated textile; - high-abrasion nylon; - molded/laminated reinforced panel. ## 18.3 Webbing Brede, dichte nylon/polyester webbing. Ton-sur-ton. Geen glanzend goedkoop bandmateriaal. ## 18.4 Hardware Voorkeur: - matte black hardware; - hoogwaardige acetal clips waar gewicht belangrijk is; - metaal alleen waar het functioneel en premium verantwoord is. ## 18.5 Binnenvoering Dry: - middellicht grijs. Wet: - glad waterproof donker materiaal. Shoes: - donker abrasion-resistant. Toiletry: - glad, afwasbaar, water-resistant. Secure: - zacht gevoerd. --- # 19. Kleur- en CMF-richting ## 19.1 Launch color **Graphite Black / Matte Black** Combinatie van: - mat zwart hoofdtextiel; - subtiel donker graphite structurele panelen; - zwarte webbing; - zwarte ritsen; - zwarte hardware; - ton-sur-ton branding. ## 19.2 Binnenzijde Geen volledig zwarte binnenkant. Hoofdvoering bijvoorbeeld: - stone grey; - light graphite; - warm grey. Doel: betere zichtbaarheid van inhoud. ## 19.3 Accentkleur Optioneel één zeer beperkte accentkleur voor functionele details: - klein pull-tab detail; - intern Wet label; - key leash; - module locator points. Niet noodzakelijk voor versie 1. --- # 20. Visuele identiteit Het product mag niet afhankelijk zijn van groot logo-oppervlak. De herkenbaarheid moet vooral komen uit de constructie. ## 20.1 Signature design element Voorgesteld: **een doorlopende structurele diagonale lijn/paneelovergang** die visueel de functionele zones verbindt. Deze lijn kan: - onderdeel zijn van de schoenventilatie; - een verborgen pocketrits maskeren; - webbing verankeren; - over beide zijden doorlopen. Zo wordt functie onderdeel van de merkidentiteit. ## 20.2 Branding Voorkeur: - klein logo; - ton-sur-ton; - emboss/deboss of rubber badge; - geen gigantisch wit woordmerk. Premium boven opvallend. --- # 21. Functionele modus per sport ## 21.1 Gym **SHOES** - EU48 gymschoenen **DRY** - sportoutfit - hoodie - ondergoed - handdoek **HYDRATE** - 1 L drinkfles **QUICK** - straps - AirPods - locker card **TOILETRY** - deodorant - douchegel - shampoo **SECURE** - smartphone - portefeuille - sleutels Wet module kan thuisblijven of plat opgeborgen worden. --- ## 21.2 Zwemmen **DRY** - droge kleding - ondergoed **WET** - grote katoenen handdoek - natte zwemkleding **SHOES** - schoenen of slippers **TOILETRY** - shampoo - douchegel - verzorging **HYDRATE** - drinkfles **SECURE** - smartphone - sleutels - portefeuille Na thuiskomst wordt de volledige Wet Module verwijderd en geopend om te drogen. --- ## 21.3 Gym + zwemmen Dit is de belangrijkste stresstest van het product. De tas moet tegelijk plaats bieden aan: - EU48-schoenen; - droge kleding; - grote katoenen handdoek; - natte zwemkleding; - 1 L fles; - toiletries; - kleine sportaccessoires; - telefoon, sleutels en portefeuille. In deze configuratie mogen de flexibele Wet- en Shoe-zones het centrale volume verkleinen, maar de tas moet zonder extreem proppen kunnen sluiten. --- # 22. Gebruikservaring ## 22.1 Aankomst in de gym 1. Tas verticaal afzetten. 2. Smartphone en waardevolle spullen in Secure Zone. 3. Schoenenvak openen zonder hoofdvak volledig leeg te halen. 4. Drinkfles uit Hydrate Zone nemen. 5. Quick Pocket gebruiken tijdens training. ## 22.2 Douchen 1. Toiletry Zone extern openen. 2. Doucheproducten pakken zonder Dry Zone te openen. 3. Natte spullen na afloop rechtstreeks naar Wet Module. ## 22.3 Thuiskomst 1. Wet Module verwijderen. 2. Natte kleding en handdoek eruit. 3. Module volledig openen/ophangen. 4. Shoe Zone open laten ventileren. 5. Dry hoofdvak blijft grotendeels proper. --- # 23. Anti-rommelstrategie Het product moet een evenwicht houden tussen organisatie en eenvoud. Daarom: ### Wel - 7 duidelijke functionele zones; - grote Dry Zone; - flexibele Wet en Shoe; - dedicated toiletry; - hidden secure; - één Quick Access. ### Niet - 15 kleine identieke ritsvakjes; - onduidelijke dubbele pockets; - veel mesh organizers; - complexe interne ritsen; - permanente harde schotten die volume verspillen. --- # 24. Interne labels Subtiele labels kunnen de eerste gebruikservaring verbeteren. Bijvoorbeeld klein ton-sur-ton of heat-transfer: - DRY - WET - SHOES - SECURE Toiletry en Bottle hoeven mogelijk niet gelabeld te worden als hun functie visueel evident is. De labels moeten klein en premium blijven. --- # 25. Rits- en hardwarelogica ## Hoofdopening - dubbele slider; - grootste puller; - eenvoudig herkenbaar op tast. ## Wet Module - eigen type puller; - optioneel klein tactiel detail. ## Secure - minimale verborgen pull. ## Shoe - stevige enkel- of dubbelzijdige rits; - goed bereikbaar wanneer tas horizontaal én verticaal staat. ## Toiletry - externe water-resistant zipper. ## Bottle - zipper die de volledige chamber veilig sluit. --- # 26. Gewichtsdoel Omdat de tas meerdere compartimenten, padding, straps en bodemversteviging bevat, bestaat risico op over-engineering. Doel: **zo licht mogelijk zonder premium structuur te verliezen.** Voor prototypeontwikkeling moet een target weight worden vastgesteld. Indicatieve richting: **ca. 1,3–1,7 kg leeg** De definitieve waarde hangt sterk af van materiaal, hardware en constructie. --- # 27. Comfortdoelen backpackmodus Omdat 38 L zwaar kan worden, moeten de straps echt bruikbaar zijn. Vereisten: - voldoende brede schouderbanden; - medium EVA padding; - afgeronde randen; - lengte geschikt voor verschillende lichaamsmaten; - load direction dicht tegen de rug; - geen harde hardware tegen het lichaam; - minimaal slingeren tijdens wandelen/fietsen. Optioneel te onderzoeken in prototypes: - subtiele sternum strap; - verwijderbaar of volledig verborgen. Voor een premium urban-sport uiterlijk is een borstband niet noodzakelijk in de eerste versie. --- # 28. Belangrijkste unieke productfeatures ## 1. Adaptive 38L architecture Shoe en Wet gebruiken alleen volume wanneer nodig. ## 2. Removable Wet Module Grote katoenen handdoek en natte kleding kunnen volledig uit de tas worden verwijderd. ## 3. EU48 flexible shoe tunnel Grote schoenen passen zonder permanent ruimteverlies. ## 4. Hidden Secure Back Pocket Telefoon en sleutels zitten uit zicht tegen het lichaam. ## 5. Dedicated Toiletry Chamber Direct bereikbaar en lekbestendig geïsoleerd. ## 6. Convertible Vertical Backpack Straps blijven bovenaan bevestigd, onderaan losklikbaar en verdwijnen achter een ritsvak. ## 7. Dual-orientation floor protection Bescherming in horizontale duffel- én verticale backpackstand. ## 8. Recessed Bottle Chamber Geen goedkoop meshvak en geen lekkende fles bij droge kleding. ## 9. Large U-opening De volledige hoofdinhoud is snel zichtbaar. ## 10. Premium low-noise exterior De functionaliteit is hoog, de buitenkant blijft visueel rustig. --- # 29. Productstory in één zin > **Een 38L premium all-round sporttas die zich aanpast aan je activiteit en nat, droog, vuil, drinken, verzorging en waardevolle spullen logisch van elkaar gescheiden houdt.** --- # 30. Mogelijke marketingtaal ## Korte positionering **Train. Swim. Move. Stay organized.** of Nederlandstalig: **Van training tot zwembad. Alles heeft zijn plaats.** ## Functionele kernboodschap **Geen grote rommelige hoofdruimte, maar één adaptief systeem.** De flexibele compartimenten gebruiken alleen capaciteit wanneer je ze nodig hebt, zodat de tas compact blijft zonder functionaliteit op te offeren. --- # 31. Prototypevereisten Voor prototype 1 moeten minimaal de volgende punten fysiek getest worden. ## Capaciteit - EU48 schoenen passen. - Grote katoenen badhanddoek past in Wet Module. - Volledige gym + swim load-out past tegelijk. - 1 L fles past. - Toiletryproducten blijven zelfstandig bereikbaar. ## Backpackmodus - comfortabel bij 8–12 kg testbelasting; - straps snel opbergen; - geen hinder van duffelhandvatten; - tas trekt niet overdreven van de rug weg; - Shoe Zone blijft onderaan gepositioneerd. ## Wet performance - natte handdoek lekt niet naar Dry Zone tijdens normaal transport; - Wet Module in minder dan 10 seconden te verwijderen; - binnenzijde makkelijk schoon te vegen; - module eenvoudig op te hangen. ## Shoe performance - ventilatie werkt zonder groot open mesh; - schoenenvuil migreert niet naar Dry Zone; - liner makkelijk reinigbaar. ## Floor test - hoofdtextiel raakt de vloer niet wanneer correct geplaatst; - centrale voet voorkomt doorzakken; - verticale bumpers beschermen korte zijde. ## Toiletry leakage - simulatie met kleine hoeveelheid shampoo/water; - vloeistof blijft zo veel mogelijk in de eigen chamber. --- # 32. Ontwerpvalidatie — kritieke tests Voor productiefase zijn minstens deze tests aanbevolen: 1. **38 L volumetest** 2. **EU48 fit-test met meerdere schoenmodellen** 3. **Wet towel load-test** 4. **1 L bottle compatibility** 5. **10 kg carry test** 6. **strap fatigue / clip cycle test** 7. **zipper cycle test** 8. **drop test** 9. **abrasion test bodem** 10. **wet-floor test** 11. **seam leakage test Wet/Toiletry** 12. **odor/ventilation usability test Shoe Zone** 13. **vertical stability test** 14. **handle load test** 15. **backpack comfort test met verschillende lichaamslengtes** --- # 33. Productie- en engineeringaandachtspunten ## 33.1 Niet over-engineeren Elke extra voering, foamlaag, rits en clip verhoogt: - gewicht; - kost; - assemblagetijd; - faalpunten. Functies moeten daarom waar mogelijk constructief gecombineerd worden. Voorbeeld: Een structureel zijpaneel kan tegelijkertijd: - ventilatie dragen; - schoenenvak verstevigen; - visuele designlijn vormen; - hardware verankeren. ## 33.2 Reparatie Waar mogelijk: - vervangbare shoulder strap; - vervangbare Wet Module; - uitneembare bodemplaat; - standaardiseerbare clips. ## 33.3 Naden Kritieke natte zones zo min mogelijk doorstikken naar Dry-compartimenten. ## 33.4 Hardwarepositionering Geen harde clips waar ze: - tegen de rug drukken; - de vloer raken; - andere kleding beschadigen. --- # 34. Duurzaamheidsrichting Zonder duurzaamheid als marketingclaim te forceren, kan het product technisch worden ontworpen voor langere levensduur. Mogelijkheden: - gerecycled high-density buitenmateriaal; - vervangbare Wet Module; - vervangbare draagriem; - hoogwaardige ritsen; - bodempaneel met hoge slijtvastheid; - minimale decoratieve componenten; - eenvoudig reinigbare materialen. Een duurzaam product begint hier vooral bij **lang gebruik en vervangbare slijtdelen**. --- # 35. Niet opnemen in versie 1 tenzij prototype dit vereist Om het product gefocust te houden: - geen ingebouwde USB-poort; - geen powerbank; - geen elektronica; - geen externe schoenveters/elastiek; - geen groot zichtbaar mesh; - geen harde telescopische constructie; - geen 15-vaks organizer; - geen complex MOLLE-systeem; - geen permanente harde interne schotten. --- # 36. Mogelijke toekomstige varianten Na validatie van de 38 L basisarchitectuur kunnen latere varianten ontstaan: ### Compact 30–32 L dagelijkse gymversie. ### Core 38 L all-round hoofdmodel. ### Team / Travel 45–50 L voor grotere sportuitrusting. ### Wet Kit Extra losse Wet Module als accessoire. ### Tech Organizer Losse organizer die in de Quick/Dry Zone kan klikken. De eerste versie moet echter zelfstandig compleet zijn zonder optionele accessoires. --- # 37. Definitieve ontwerpbeslissingen versie 1.0 | Onderdeel | Beslissing | |---|---| | Producttype | All-round sportduffel | | Volume | 38 L | | Vorm | Licht gestructureerd rechthoekig | | Hoofdopening | Grote U-opening | | Duffel carry | Ja | | Shoulder strap | Ja, afneembaar | | Backpack | Ja | | Backpackoriëntatie | Verticaal | | Strap storage | Boven bevestigd, onder losklikbaar, verborgen achter rugrits | | Shoe Zone | Flexibel, EU48 | | Wet Zone | Uitneembaar | | Wet capaciteit | Grote katoenen handdoek + zwemkleding | | Toiletry | Eigen extern bereikbaar vak | | Drinkfles | Verzonken gesloten chamber, ±1 L | | Hidden pocket | Ja, tegen rugzijde | | Quick Access | Ja | | Bodemvoetjes | Ja, 5 TPU/TPE | | Verticale bumpers | Ja | | Exterior style | Premium sportief | | Branding | Subtiel / ton-sur-ton | | Hoofdkleur | Matte black / graphite | | Binnenvoering | Lichter grijs | | Rigide verdelers | Nee | | Flexibele volume-expansie | Ja | --- # 38. Samenvatting van het product Het uiteindelijke concept is een **38 liter premium all-round sporttas** die visueel clean blijft, maar intern veel slimmer georganiseerd is dan een traditionele duffel. De gebruiker krijgt een groot centraal Dry-compartiment met brede U-opening. Vanaf de buitenzijde zijn schoenen, toiletryproducten, drinkfles, quick-access items en waardevolle spullen afzonderlijk bereikbaar. Een uitneembare Wet Module houdt een grote natte badhanddoek en zwemkleding fysiek gescheiden van het droge hoofdvak. Het schoenenvak is geschikt voor **EU48** en expandeert alleen wanneer het wordt gebruikt. Hetzelfde adaptieve principe geldt voor de Wet Module. Hierdoor blijft de volledige 38 L flexibel inzetbaar. De tas kan met de hand, over de schouder of verticaal als backpack worden gedragen. De backpack straps blijven bovenaan bevestigd, klikken onderaan los en verdwijnen achter een discreet ritsvak in het rugpaneel. Een verstevigde waterbestendige bodem met vijf lage TPU/TPE-voetjes houdt de tas van natte kleedkamervloeren. Extra bumpers beschermen de tas wanneer ze verticaal wordt neergezet. Het resultaat moet niet aanvoelen als een sporttas met zo veel mogelijk features, maar als een **doordacht productsysteem waarbij iedere zone een duidelijk probleem oplost**. --- ## Kernconcept **DRY — WET — SHOES — HYDRATE — TOILETRY — QUICK — SECURE** **38 L. Eén tas. Geen chaos.**
A photorealistic food pouch mockupthe dementions are 4.75inches by 7.75 inches have the back ground winter themed and have a cup of eggnog
A photorealistic food packaging stand up pouch make it oriental themed
A photorealistic food pouch
A photorealistic food pouch mockupthe dementions are 4.75inches by 7.75 inches have the back ground winter themed and have a cup of hot cocoa and marshmellows
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it background has freeze dried skittles
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism. remove the foldings of the bag so it look perfect
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it
Create a premium, photorealistic, high-resolution studio product image using the uploaded Image 1 as the exact product reference. DO NOT CHANGE THE COLORS AT ALL. The final result must look like a professionally retouched e-commerce and catalogue product photograph: perfectly straight, smooth, clean, realistic, premium, and ready for commercial use. IMAGE REFERENCE PRIORITY IMAGE 1 — ABSOLUTE PRIMARY REFERENCE Image 1 is the EDIT TARGET and the absolute primary reference for the packaging. Use Image 1 EXACTLY for: All colors Light/pale colors Shades and tones Gradients Artwork Branding Logo Typography Patterns Graphic elements Packaging shape Structure Proportions Dimensions Seals Edges Cut-outs Hanging holes Labels Margins Spacing Overall visual identity THE COLORS OF IMAGE 1 MUST BE REPRODUCED EXACTLY. This is extremely important: DO NOT brighten, darken, saturate, desaturate, warm up, cool down, or otherwise modify ANY color from Image 1. In particular, preserve the very light/pale colors exactly as they appear in Image 1. Do not make the light colors more saturated, darker, whiter, greyish, beige, yellowish, or otherwise different. PRODUCT PRESENTATION Show one complete product/package only. Position it perfectly upright and precisely front-facing. Center it horizontally and vertically. Make it level, balanced, and symmetrical. Preserve the exact packaging shape, silhouette, dimensions, edges, seals, cut-outs, hanging holes, and structural details from Image 1. Correct the camera angle and perspective so the product appears professionally photographed straight-on. Leave generous and evenly distributed empty space around the product. Do not crop any part of the packaging. Do not tilt or lean the packaging. Do not use a three-quarter angle. The packaging must look naturally manufactured and realistic — not inflated, pillow-like, distorted, or artificially reshaped. PACKAGING SURFACE — CRITICAL Make the front of the packaging perfectly smooth, flat, taut, clean, and evenly presented. Remove the folds completely. Remove all: Folds Wrinkles Creases Dents Bulges Ripples Waves Crumpled areas Uneven reflections Surface distortions Warping Sagging Excessive plastic deformation The packaging should look as though it has been professionally flattened and prepared for a premium catalogue product photograph. The surface must appear perfectly smooth and controlled, while still remaining physically realistic and naturally manufactured. OPENING AREA Keep only a very small, subtle natural fold/crease at the actual bag opening, if visible in the reference. Do NOT place folds on the top/front body of the bag. The main body of the packaging must remain completely smooth and flat. Do not create artificial wrinkles or folds anywhere else. FINISH & LIGHTING Use a clean matte-to-satin finish with only extremely subtle and controlled highlights. The lighting should resemble a professional high-end studio product photograph. Use: Soft, even studio lighting Clean exposure Natural dimensionality Very subtle realistic shadows Controlled highlights Neutral white studio background Do not add: Visible plastic texture Grain Fabric texture Leather texture Embossing Artificial surface texture Excessive gloss Harsh reflections Dramatic shadows Cinematic color grading The product should look premium, clean, minimal, realistic, and commercially photographed. ARTWORK PRESERVATION — ABSOLUTE Preserve the supplied product design exactly as provided in Image 1. Keep completely unchanged: Brand logo Product name Typography All written information Product photographs Illustrations Icons Symbols Colors Gradients Patterns Graphic elements Artwork proportions Margins Spacing Flavor information Net weight Label placement Packaging proportions The complete artwork must appear: Flat Sharp Correctly aligned Undistorted Professionally printed Fully readable where visible Do not redesign, regenerate, rewrite, simplify, stretch, compress, curve, move, crop, replace, or reinterpret any part of the artwork. Do not invent missing details. COLOR ACCURACY — CRITICAL IMAGE 1 IS THE COLOR MASTER. The final image must preserve the exact colors of Image 1. Do not apply any: Color grading Cinematic grading Warm tint Cool tint Contrast color shift Saturation adjustment Desaturation Brightening of pale colors Darkening of pale colors Hue changes White-balance color shifts Every color must remain visually identical to Image 1. Pay particular attention to the extremely light and pale areas of the original packaging. They must remain exactly as light, soft, and subtle as they appear in Image 1. FINAL IMAGE REQUIREMENTS The final result must look like a real professional studio photograph of the exact same packaging from Image 1, only cleaned up and professionally presented. The packaging should be: Straight + Front-facing + Centered + Smooth + Flat + Taut + Undistorted + Clean + Sharp + Photorealistic + Premium. Keep the original packaging design and colors 100% faithful to Image 1. Do not alter the product design. Do not change the colors. Do not redesign anything. The only significant modification should be the professional photographic presentation and complete removal of unwanted folds, wrinkles, creases, dents, bulges, ripples, and surface distortions, while keeping only a tiny natural fold at the actual opening of the bag if necessary for realism.
A photorealistic food pouch mockup for a chocolate bar first image is the design I want second image is what it looks likeonce it is sealed
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it
Macrame mirror place on a wall above a table with rustic decor like macrame vase, crystals in bowls with an overall boho vibe.
A photorealistic food pouch mockup
A photorealistic food packaging mock up. it is not a stand up pouch it is sealed on all 4 sides just like the the second photo first pick is what the package looks like second picture is how the package shape looks, when the product is sealed into it background has nice freeze dried skittles and chocolate
A Bluey theme center piece for a baby girl's first birthday using a formula can with fake ribbon flowers in it, along with candy flowers sticking out to blend in, a stick in the center of the can with a Bluey character in the center of the stick, along with balloons sticking out at the top
A photorealistic food pouch mockup make the pickles in the photo mini full sized pickles not cut up
AUREN Botanical Fragrance — Brand Identity Concept Overall style: Ivory + olive + amber + champagne gold | luxury | warm | editorial 01 — Brand Strategy Create a premium brand strategy moodboard for AUREN, a modern botanical fragrance brand. Sophisticated natural luxury, botanical ingredients, warm ivory, deep olive, amber and champagne gold, elegant editorial photography, refined international fragrance aesthetic. 02 — Logo Design Design a sophisticated logo system for AUREN, premium botanical fragrance brand. Elegant custom AUREN wordmark with a distinctive minimal A symbol inspired by botanical forms, refined luxury typography, olive and champagne gold, clean vector presentation, white background. 03 — Visual Identity System Create AUREN visual identity system, elegant serif and modern sans-serif typography, ivory, deep olive, amber and champagne gold palette, abstract botanical symbols, organic geometric pattern, premium editorial branding board, clean sophisticated layout. 04 — Packaging Design Create photorealistic AUREN fragrance packaging, elegant amber perfume bottles, ivory rigid boxes, champagne gold details, deep olive labels, refined typography, multiple fragrance variants, premium materials, realistic shadows, luxury commercial product photography, crisp HD. 05 — Stationery & Brand Applications Create AUREN branded applications including luxury business cards, perfume shopping bag, tissue paper, thank-you card, envelope, product tags and branded packaging, ivory and olive palette, subtle gold details, tactile paper, photorealistic premium mockups. 06 — Social Media Design Create AUREN luxury fragrance social media campaign, elegant perfume bottles, botanical ingredients, warm sunlight, ivory and olive backgrounds, sophisticated editorial compositions, premium Instagram posts and stories, consistent luxury branding, photorealistic HD. 07 — Digital Brand Experience Create AUREN luxury fragrance website homepage, elegant perfume hero product, ivory background, deep olive navigation, amber product photography, refined typography, fragrance collection, ingredients section, premium minimalist web design, realistic HD presentation. 08 — Creative Direction Create AUREN creative direction board, botanical fragrance photography, amber glass, olive leaves, ivory stone, champagne gold details, warm sunlight, elegant shadows, tactile natural materials, sophisticated luxury editorial moodboard. 09 — AI-Assisted Design Process Create an AUREN AI-assisted design process board showing mood exploration, botanical references, logo concepts, typography exploration, packaging experiments and final visual identity, elegant editorial grid, premium design presentation. 10 — Final Campaign Create a breathtaking AUREN fragrance advertising campaign, elegant amber perfume bottle on sculptural ivory stone surrounded by subtle botanical leaves, deep olive shadows and warm golden sunlight, cinematic luxury product photography, photorealistic, ultra-detailed, crisp HD.
An acrylic sign featuring a tasteful sample brand design standing on a reception desk with soft studio lighting catching the clear edges, straight-on angle with a blurred office backdrop, no watermarks, no text overlays Name: Hend Eltawil Title: Head of Lower Primary
A photorealistic food pouch mockup for a chocolate bar first image is the design I want second image is what it looks likeonce it is sealed
a pair of dark navy blue foldover baggy yoga pants, white background with the back strap reading "SPARTANS" in gems
Recreate the exact glass pharmaceutical vial shown in the reference image, with no design changes whatsoever — same lilac flip-off cap, same silver crimp collar, same clear glass vial, same pink label with black double-line border. Label text must match exactly: "truepeps.co.uk" at the top, a black bar containing "Reta 30mg" in pink text, and "Research only" in small italic text at the bottom. Do not alter colors, wording, logo, or label layout in any way other than do not include the text that says 1ml bac: 10iu = 1mg Reframe only: center the vial upright in the middle of the frame, straight-on eye-level angle, full label facing camera and fully legible with no text cut off. Place on a seamless pure white studio background. Soft, even diffused studio lighting with no harsh glare on the glass or cap. Subtle soft realistic shadow directly beneath the vial. Sharp focus throughout, especially the label text. Professional e-commerce product photography style, high detail, 4K.
Recreate the exact glass pharmaceutical vial shown in the reference image, with no design changes whatsoever — same white flip-off cap, same silver crimp collar, same clear glass vial, same pink label with black double-line border. Label text must match exactly: "truepeps.co.uk" at the top, a black bar containing "Reta 20mg" in pink text, then "1ml Bac: 10iu = 1mg" below it, and "Research only" in small italic text at the bottom. Do not alter colors, wording, logo, or label layout in any way. Reframe only: center the vial upright in the middle of the frame, straight-on eye-level angle, full label facing camera and fully legible with no text cut off. Place on a seamless pure white studio background. Soft, even diffused studio lighting with no harsh glare on the glass or cap. Subtle soft realistic shadow directly beneath the vial. Sharp focus throughout, especially the label text. Professional e-commerce product photography style, high detail, 4K.
Recreate the exact glass pharmaceutical vial shown in the reference image, with no design changes whatsoever — same white flip-off cap, same silver crimp collar, same clear glass vial filled with clear liquid, same white label with black double-line border (note: white label, not pink, unlike the peptide vials). Label text must match exactly: "truepeps.co.uk" at the top, a black bar containing "BAC 10ml" in white text, and "Bacteriostatic water" in plain text below. Do not alter colors, wording, logo, or label layout in any way. Reframe only: center the vial upright in the middle of the frame, straight-on eye-level angle, full label facing camera and fully legible with no text cut off. Place on a seamless pure white studio background. Soft, even diffused studio lighting with no harsh glare on the glass or cap. Subtle soft realistic shadow directly beneath the vial. Sharp focus throughout, especially the label text. Professional e-commerce product photography style, high detail, 4K.

Frequently asked questions

How does the AI cellophane bag mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic cellophane bag mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the cellophane bag?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the cellophane bag with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Clear Poly Bag mockup generatorVelvet Ring Box mockup generatorWooden Gift Box mockup generatorCorrugated Display Box mockup generatorFolding Carton Box mockup generatorTuck Top Box mockup generatorAuto Lock Bottom Box mockup generatorShipping Box With Logo mockup generatorBranded Poly Mailer mockup generatorMatte Poly Mailer mockup generatorAll packaging & labels mockups →