AI wall charger and cable mockup generator

Wall Charger and Cable mockups, generated — not templated

Charging bundles sell better shown as a complete kit, with the block and cable displayed together rather than as separate photos. A wall charger and cable mockup arranges both pieces the way they'd actually be used.

Photorealistic lighting, shadows and materials
Upload your own design, logo or artwork
Any scene you can describe — no template hunting
Edit, restage, upscale and animate afterwards

AI-generated wall charger and cable mockup sample

Generated with Mockup Generator — “A wall charger plugged into an outlet with a braided cable coiling down to a pho…”

Prompt ideas to start from

“A wall charger plugged into an outlet with a braided cable coiling down to a phone on a nightstand, warm evening lamp light, close three-quarter angle, no watermarks, no text overlays”Use this prompt “Wall charger and cable on a desk beside a laptop”Use this prompt “Wall charger and cable close-up on the braided texture”Use this prompt “Wall charger and cable in a travel bag, packed neatly”Use this prompt

Fresh from the community

Photorealistic product mockup of a table, professional studio lighting, clean modern scene four round tables white table cloth with black table runner and white chair cover with black sashes white flowers and black charger plate with a white dinner in side and black napkins and cylinder table arrangement with white flowers around it

Photorealistic product mockup of a bathroom design, professional studio lighting, clean modern scene.

Shower pan: 36"W x 60"L, white base
Large wall (back wall, 60" length): Othello hexagon tile, grey grout, white niche (36"W x 14"H) centered
Two side walls: solid white panels/tile
Bench: on the wall opposite the plumbing/valve wall
Fixtures: handheld shower head, chrome finish
Door: chrome-accented barn-style double slider 60" x 74", 5/16" in clear glass w jambs
Height: 96" (8')

Macrame mirror place on a wall above a table with rustic decor like macrame vase, crystals in bowls with an overall boho vibe.

Shower: approximately 5' wide × 5' deep visually. Frameless clear glass enclosure. Use Carrara marble-look 6" × 12" wall tile in running bond. Shower floor is 2" × 2" honed Carrara mosaic.

A cosy child’s bedroom, with sage green and warm beige walls; a display of 6-8 empty rectangular frames - some horizontal, some vertical - hung on the wall above a small floor-level bed with cream-coloured bedding, in a minimalist Scandinavian style, a bedside table with a small bedside lamp; a warm and welcoming atmosphere; a photorealistic photorealistic,

Photorealistic product mockup of a shower with this tile https://www.anatolia.com/collections/teramodaa on the wall and brushed gold fixtures by pfister and glass doors

Create a realistic product mockup based on these instructions:

Create a cozy Mid-Century eclectic living room bathed in warm golden hour light. The art print, featuring abstract forms, hangs straight on the wall. Surround it with a soft-textured vintage couch and vibrant throw pillows. Add twinkling fairy lights around the windows and scattered plants for a lived-in feel, highlighting modern accents throughout the space.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

give me a visual mockup for a 3 by 4 meter exhibition booth with two open sides and two walled sides. i want to keep the cost minimal, by building the exhibition area myself using forex material. www.neongalaxy.com

Photorealistic product mockup of a archiUsing the provided Health floating-island image as the ONLY design reference, create a collection of clear close-up camera views showing the existing architecture, training area, and running track.

This is NOT a redesign. Treat the original image as an already-finished 3D environment. The purpose is only to move the camera closer so a 3D artist can clearly understand what is already there.

Show close views of:

1. Main Health building — clearly show the front entrance, large central arch, smaller side arches, columns, pale stone construction, wood upper section, roof, exterior walls, and stairs.

2. Main building side angle — show how the arches, side walls, roof, terrace, foundation, and surrounding landscaping connect.

3. Main staircase — clearly show the broad stone stairs, retaining walls, planters, hedges, vines, rocks, and connection between the central plaza and main building.

4. Outdoor training area — clearly show the existing pull-up bars, parallel bars, vertical training poles, benches, stone exercise pieces, paved surface, and surrounding low hedges.

Preserve the same shapes, proportions, materials, colors, object placement, landscaping, and realistic visual style shown in the original image.

Do not add equipment, buildings, decorations, paths, structures, architectural details, or landscaping that are not already visible.

If a hidden detail cannot be determined from the original image, keep it simple instead of inventing it.

Each image should feel like the camera moved closer to the exact original island.

No people, text, labels, UI, redesigns, or new features.

A photorealistic peptide vial mockup with gold top and the uploaded picture as the label do not change the label

A photorealistic peptide vial mockup with gold top and the uploaded picture as the label do not change the label, make sure the label spands a good amount of the vial, white back ground

I need a MARKETING MOCKUP CAMPAIGN FOR Red Bull that I use in a porfolio on canva i need the mock campaign to be good to look like an ad

Edited mockup: change the name on the peptide vite to Retatrutide and make it 20mg

Edited mockup: Change the RETATRUTIDE in KISSPEPTIN

Edited mockup: Change the RETATRUTIDE in PT-141

A photorealistic peptide bottle mockupd top and white backgroundlabel fits well and covers a good part of the bottle do not change the label

Create a realistic product mockup based on these instructions:

A sleek iPhone 15, showcasing its elegant design without a case, rests on a minimalist wooden table. The device's vibrant screen displays a colorful live wallpaper, reflecting light in an artistic manner. Surrounding it, soft natural light filters through a nearby window, enhancing the phone's sophisticated, modern aesthetic.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Edited mockup: change the name from MOTS-c to GLP2-TRZ, change Metabolic Regulator to GLP1-GIP,

create a link that will redirect who clink the link to a page that willl show transfer processing below of it it’ll showing something that like something rolling for few seconds and then show your transfer is now successfully activated and funds would be automatically be released to your registered wallet immediately your trading account meets required available balance of $250 then shows where it says kindly add more funds to trading account balance and below show current balance is $100 in the next page

Change GLP2-TRZ to GLP3-RT, change GLP1-GIP to GLP1-GIP-GLUCAGON, change LOT: TRZ-2608-1 to LOT: RT-2608-1. Remove background. Make no other changes

Create a photorealistic 3D product mockup of the exact same silicone wristband shown in the reference image. Preserve the identical wristband construction, shape, proportions, thickness, curved oval/circular form, snap-button closure, buckle structure, central rectangular rounded-rectangle panel, and viewing angle. The wristband should be bright orange/yellow silicone with a smooth matte finish. Keep the front central panel clearly visible and facing the camera. Maintain the same white background, soft studio lighting, realistic shadows, subtle silicone texture, natural highlights, and premium commercial product-photography appearance. The wristband must remain empty/blank so I can apply my own artwork/design onto the central front area. Do not redesign, reshape, stretch, add holes, change the buckle, or alter the proportions. Match the reference image as closely as possible. High-resolution, realistic 3D render, clean isolated product shot, professional e-commerce mockup.

Use Image 2 as the exact packaging shape, size, proportions, structure, and realistic mockup reference. Use Image 1 as the exact artwork/design reference.

Put the complete design from Image 1 onto the packaging from Image 2, without changing anything in the design.

Keep all colors, text, logos, images, badges, and graphics exactly the same as Image 1.
Keep the packaging shape and proportions exactly like Image 2.
Make the package perfectly straight, front-facing, flat, smooth, and wrinkle-free.
No folds, creases, bending, distortion, or warped artwork.
Do not add, remove, redesign, or reinterpret anything.
Use a clean white background with a subtle soft shadow, like Image 2.
Make it look like a premium, realistic product photograph.

Image 2 = packaging shape. Image 1 = artwork. Nothing else changes.

Photorealistic product mockup of a table with record

Edited mockup: Using the image and label, change 'Selank' to 'Hexarelin'

A photorealistic peptide mockup. Make the background withought the box

Edited mockup: make the background white and brighter do not change the bottle

Create a realistic product mockup based on these instructions:

Crée moi un mockup de hoodie, mettant en avant un design urbain inspiré par la culture street art. Utilise une palette de couleurs vives et audacieuses, avec des motifs géométriques et des illustrations graphiques. Intègre des détails comme des cordons contrastants et une étiquette de marque unique pour un look accrocheur.

Create a professional, photorealistic mockup scene. Since no design image was provided,
show the product/scene with a placeholder or blank surface where a design would typically go.

Frequently asked questions

How does the AI wall charger and cable mockup generator work?

Describe the scene you want — or upload your design, logo or artwork — and the AI renders a photorealistic wall charger and cable mockup in seconds, with natural lighting, shadows and perspective. No Photoshop templates or smart objects needed.

Can I put my own design on the wall charger and cable?

Yes — upload up to four reference images (logos, artwork, screenshots or product shots) and the AI integrates them onto the wall charger and cable with realistic warping, lighting and materials.

Who owns the mockups?

You do — mockups you generate are yours. See our Terms of Service for full details. Copyright rules vary by country and we can't give legal advice, so check with a legal expert on specific questions.

More mockup generators

Desktop Charging Dock mockup generator Solar Power Bank mockup generator VR Headset mockup generator VR Headset and Controllers mockup generator VR Gaming Setup mockup generator Camera Drone mockup generator Mini Drone mockup generator Drone Controller mockup generator Drone in Flight mockup generator iPhone 17 Pro Max mockup generator All tech & devices mockups →